User manual LG NB2420A

[. . . ] ENGLISH MAGYAR CESTINA HRVATSKI SRPSKI SIOVENCINA OWNER'S MANUAL 160 W Sound Bar System Please read this manual carefully before operating your set and retain it for future reference. POLSKI ROMN NB2420A (NB2420A) NB2420A-NB_DHUNLLK_ENG_4412. indd 1 2012-04-06 1:25:13 2 Getting Started Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. [. . . ] y The unit's USB Port cannot be connected to PC. The unit can not be used as a storage device. 2 Connecting NB2420A-NB_DHUNLLK_ENG_4412. indd 15 2012-04-06 1:25:16 16 Operating Basic Operations USB Operation 1. Select the USB function by pressing INPUT. Select a file you want to play by pressing C or V. During playback, press C or V to go to the next file or to return to the beginning of the current file. Press C twice briefly to step back to the previous file. Press and hold C/V during playback and release it at the point you want to listen to. Press REPEAT on the remote control repeatedly, the display change in the following order, RPT 1 RPT D (DIRECTORY) RPT ALL RANDOM OFF. Press 0 to 9 numerical buttons on the remote control to go to the desired file directly. Do this Other Operations DOLBY DRC (Dynamic Range Control) Make the sound clear when the volume is turned down (Dolby Digital only). Set to [DRC ON] by using DOLBY DRC. AV Sync When receiving audio signals from TV, sound and images may not be matched. In the case, this function can adjust the delay time. Use C V to scroll up and down through the delay amount, which you can set at anything between 0 and 300m/sec. 3 Operating Pause Skipping to the next/ previous file AUTO POWER On/Off Before operating this function, make sure that you have selected OPTICAL IN and turn on the AUTO POWER. This function automatically turns on/off the unit when you turn on/off the external device (TV, DVD Player, Blu-ray Disc Player, etc. ) connected to this unit by the optical cable. This function turns on or off each time you press AUTO POWER. Display AUTO POWER ON AUTO POWER OFF Operation AUTO POWER function is turned on. AUTO POWER function is turned off. Searching for a section within a file Playing repeatedly or randomly Selecting files directly y This function is intentionally designed to turn off the unit after 15 minutes of inactivity. If you did not connect external devices with optical cable or there is no digital audio signal going to the unit, the unit will turn off after 15 minutes of inactivity if AUTO POWER function is turned on. y Depending on the connected device by the optical cable, this function may not operate. , Note NB2420A-NB_DHUNLLK_ENG_4412. indd 16 2012-04-06 1:25:16 Operating 17 Sleep Timer Setting Press SLEEP one or more times to select delay time between 10 and 180 minutes, after the unit will turn off. To check the remaining time, press SLEEP. To cancel the sleep function, press SLEEP repeatedly until "SLEEP 10" appears, and then press SLEEP once again while "SLEEP 10" is displayed. You can check the remaining time before the Unit turns off. [. . . ] The remote control does not work properly. Operate the remote control within about 23 ft (7m). There is an obstacle in the path of the remote control and the unit. The battery in the remote control is exhausted. [. . . ]