User manual LG NB2540

[. . . ] ENGLISH DEUTSCH FRANÇAIS OWNER’S MANUAL 2. 1 Channel Powerful Bass Sound Bar Please read this manual carefully before operating your set and retain it for future reference. NB2540 (NB2540, S24A1-W) NB2540D (NB2540D, S24A1-W) ITALIANO SLOVENŠČINA NEDERLANDS www. lg. com NB2540-NB. ADEULLK_ENG. indd 1 2014-02-07 9:55:33 1 Getting Started 2 Getting Started WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. [. . . ] In this case the unit will be turned off automatically and when you restart the unit, it will be turned on by LG TV function. Turn off the sound temporarily Press i to mute your unit. To cancel it, press i again on the remote control or change the volume level. Note , , 3 Operating NB2540-NB. ADEULLK_ENG. indd 15 2014-02-07 9:55:38 16 Operating Auto power down This unit will power off itself to save electric consumption in the case main unit is not connected to external device and is not used for 20 minutes. So does this unit after six hours since Main unit has been connected to other device using analog input. With wired connection 1. Connect your LG TV to the unit by using an optical cable. LG Sound Sync Optical cable 3 Operating You can control some functions of this unit by your TV's remote control with LG Sound Sync. It is compatible with the LG TV that supports LG Sound Sync. Make sure of the LG Sound Sync logo on your TV. Controllable function by LG TV's remote control : Volume up/down, mute Refer to the TV's instruction manual for the details of LG Sound Sync. Make one of the following connections, depending on the capabilities of your equipment. yy You can also use the remote control of this unit while using LG Sound Sync. If you use TV's remote control again, the unit synchronizes with the TV. yy When the connection fails, make sure of the condition of the TV and power. yy Make sure of the condition of this unit and the connection in the cases below when using LG Sound Sync. -- Disconnecting the wireless connection caused by interference or a distance. yy The amount of time to turn off this unit is different depending on your TV when you set AUTO POWER function to ON. 2. Set up LG Sound Sync (Optical) on the TV. Refer to the TV's instruction manual. 3. Turn on the unit by pressing 1 (Power) on the remote control. 4. Select OPTICAL IN function by using OPTICAL on the remote control or F on the unit until the function is selected. TV sound will be outputted from the soundbar if connecting normally between this unit and your TV. Note , , NB2540-NB. ADEULLK_ENG. indd 16 2014-02-07 9:55:38 Operating 17 With wireless connection 1. Turn on the unit by pressing 1 (Power) on the remote control. 2. Select LG TV function by using LG TV on the remote control or F on the unit until the function is selected. 3. Set up LG Sound Sync (Wireless) on the TV. Refer to the TV's instruction manual. LG TV LED will be turned on for 3 seconds and turned off when unit is completely connected to TV. If you turned off the unit directly by pressing 1 (Power), LG Sound Sync (Wireless) will be disconnected. [. . . ] Replace the batteries with new one. No sound No woofer sound 4 Troubleshooting The AUTO POWER function does not work. yy Depending on the connected device, this function may not operate. Check the details below and adjust the unit according to them. yy Switch [ON] state of DRC function to [OFF] by using remote controller. When you feel the output sound of the unit is low. yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM]. [. . . ]