User manual LG NB3520A

[. . . ] ENGLISH DEUTSCH FRANÇAIS NEDERLANDS SLOVENSCINA ITALIANO OWNER'S MANUAL 300W Sound Bar System Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL PORTUGUÊS NB3520A (NB3520A, SHS36-D) NB3520A-NB_DDEULLK_ENG_6185. indd 1 2012-01-17 6:48:55 2 Getting Started Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. [. . . ] y Do not extract the USB device while in operation. y For a large capacity USB, it may take longer than a few minutes to be searched. y To prevent data loss, back up all data. y If you use a USB extension cable or USB hub, the USB device is not recognized. y This unit is not supported when the total number of files is 1000 or more. y External HDD, Card readers, Locked devices, or hard type USB devices are not supported. y The unit's USB Port cannot be connected to PC. The unit can not be used as a storage device. 2012-01-17 6:49:00 Operating 17 Basic Operations USB Operation 1. Select the USB function by pressing INPUT. Select a file you want to play by pressing C or V. During playback, press C or V to go to the next file or to return to the beginning of the current file. Press C twice briefly to step back to the previous file. Press and hold C/V during playback and release it at the point you want to listen to. Press REPEAT on the remote control repeatedly, the display change in the following order, RPT 1 RPT D (DIRECTORY) RPT ALL RANDOM OFF. Press 0 to 9 numerical buttons on the remote control to go to the desired file directly. Do this Other Operations DOLBY DRC (Dynamic Range Control) Make the sound clear when the volume is turned down (Dolby Digital only). Set to [DRC ON] by using DOLBY DRC. AV Sync When receiving audio signals from TV, sound and images may not be matched. In the case, this function can adjust the delay time. Use C V to scroll up and down through the delay amount, which you can set at anything between 0 and 300m/sec. 3 Operating Skipping to the next/ previous file AUTO POWER On/Off Before operating this function, make sure that you have selected OPTICAL IN and turn on the AUTO POWER. This function automatically turns on/off the unit when you turn on/off the external device (TV, DVD Player, Blu-ray Disc Player, etc. ) connected to this unit by the optical cable. This function turns on or off each time you press AUTO POWER. Display AUTO POWER ON AUTO POWER OFF Operation AUTO POWER function is turned on. [. . . ] The remote control does not work properly. Operate the remote control within about 23 ft (7m). There is an obstacle in the path of the remote control and the unit. The battery in the remote control is exhausted. [. . . ]