User manual LG NXP-930ATR

[. . . ] You should record requested information here and retain this guide as a permanent record of your purchase. ___________________________________ Serial No. ___________________________________ This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation mark within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. [. . . ] ­ If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers. ­ Do not disassemble the front cover of supplied speaker. ­ The sound is muted during playing back a disc recorded DTS. Connecting to an optional equipment 1. Connect the Left and Right AUDIO OUT jacks on an optional equipment (VCR, CD Player, TV, AUDIO, etc. ) to the audio left and right in jacks (DVD) on your subwoofer (A). To enjoy the sound from an optional equipment, press INPUT on the remote control to select source of the subwoofer to AUX. A R L AUDIO OUTPUT VCR or optional equipment 5 Presetting the Radio Stations You can preset 50 stations of FM tuner. Before tuning, make sure that you have turned down the volume to the minimum. Press INPUT repeatedly to select FM tuner mode. Select a station you want by pressing TUNER (-)/(+) buttons on the remote control. Tuning in automatically - Press TUNING (-)/(+) for more than 0. 5 second. Scanning stops when the unit tunes in a station. Tuning in manually - Press TUNING (-)/(+) briefly and repeatedly. A preset number will flash in the display window. Press PRESET (-)/(+) to select the preset number you want. Repeat steps 1 (or 2) to 5 to store other stations. To delete all the memorized stations Press and hold MEMORY button on the subwoofer for about two seconds, "CLEAR" appears in the display window and then press MEMORY button again, the stations are deleted. For your reference If all stations have already been memorized, "FULL" message will appear in the display window for a moment and then a preset number will flash. To change the preset number, follow the steps 4-5. To recall presets Press and hold PRESET (-)/(+) until the desired preset number appears or press it repeatedly. Listening to the Radio 1. Press INPUT repeatedly to select FM tuner mode. Press PRESET (-)/(+) repeatedly to select the preset station you want. [. . . ] Correction Connect the audio cable securely. Turn on the equipment connected with the audio cable. Connect them correctly, that is L (left) to L, R (right) to R. Point the remote control at the remote sensor of the DVD player. [. . . ]