User manual LG PQCPB11A0E

[. . . ] It may cause product breakdown with the damage to its parts. ¿l ¿^¿ ¿^`/` ¿l ¿^¿ ¿^`/` ¿l ¿^¿ ¿^`/` s In-use Do not clean the product with strong cleanser such as solvent. Use soft clothes in order to prevent fire or product deformation. Do not touch the product with a wet hand. It may cause product breakdown or an electric shock. ¿l ¿^¿ ¿^`/` ¿l ¿^¿ ¿^`/` 4 Simple Central Controller Before Use Before Use System Drawing ENGLISH Total 128 indoor units can be controlled by central controllers using function controller along with. [. . . ] On/Off status display LED (total 16EA) Displays the status of the indoor unit if individual On/Off button is pressed. · Cooling/dehumidification/blowing operation: Green · Heating operation: Orange · Failure of product: Red · Stop: Off 2. Power display LED · Application of power: Green · No power: Off · During control: Flickering 3. Individual On/Off button (total 16EA) On/Off control of the connected indoor units. Total Off button Sequentially turns off all indoor units connected to it. Total On button Sequentially starts all indoor units connected to it. 1 3 2 4 5 Annexed parts Central controller anchoring screws (4EA) Owner/Installation manual Actual name description sheet Addressing remote control AAA cell (2EA) Guide sheet 6 Simple Central Controller Operation Tips Operation Tips Control of On/Off operation Individual Operation 1. Press the individual On/Off button, then the equivalent unit starts and LED is on. If pressing the individual On/Off button, equivalent unit stops and LED is off. ENGLISH Total Control for Each Group · Press Total On button, then all units of that group operate sequently and LED is on. · Press Total Off button, then each group units stop sequently and LED is off. Total On/Off Operation (master & slave combination) 1. Press Total On button for more than 2sec, then all linked units start sequentially and their LEDs turn on. Press Total Off button for more than 2sec, then all linked units stop sequentially and their LEDs turn off. Owner's Manual 7 Operation Tips · Mode change function doesn't work when the function controller is connected with the system. Mode Change Operating mode change for individual indoor unit While changing the operating mode of the indoor unit, press the individual Operate/Stop button for 2 seconds and the operating mode of the applicable indoor unit will change from cooling to heating mode or from heating to cooling mode. is 1. Owner's Manual 11 Operation Tips Function Controller Connection Individual indoor unit control 1. Press the individual On/Off button of the central controller and select the indoor unit to be controlled. Now the applicable indoor unit will start or stop. Function controller indicates the operating status of the selected indoor unit and makes it to change the condition to adjust the wind/set temperature of the operating mode. PQCSC101S0 Group indoor unit control(1 group) 1. Press Total On/Total Off button of the Central controller. Then all the connected units will operate/stop. Function controller indicates the operating statue of the first indoor unit of that group if no settings have been made at functional controller. However all indoors can also work under same running conditions as a group by making settings at the functional controller. All Groups (master & slave) Indoor Unit Control 1. Press Total On/Total Off button for more than 3 seconds. Then all indoor units conected to whole network will start/stop. [. . . ] Function control displays the operating status of the first indoor unit of master controller only. It also display "Total on" on its screen. Now the settings can be done for all groups using function controller. PQCSC101S0 12 Simple Central Controller Operation Tips Group selection from Master Centrol Controller 1. Press the On/Off button for more than 3 seconds on the master Central controller equivalent to the group no. [. . . ]