User manual LG PTED0902WCA

[. . . ] Use of controls or performance of procedures other than those specified herein may result in hazardous radiation exposure. WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture Industry Canada requirement This class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. FCC COMPLIANCE STATEMENT Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] The disc may become damaged, causing data loss. · Be careful to prevent foreign objects, such as liquids or metal, from entering the drive. · Don't interrupt the electric power while the drive is operating. · Please pay attention to handling Electrostatic Sensitive Devices, you may use anti-static products such as wrist straps, heel straps, mats to protect your body from electrostatic. 2 System Environment Operating Environment This unit can be operated in the system environment explained here. · CPU : Pentium D 3. 2 GHz or higher (Motherboard that supports SATA. ) (Recommended Core 2 Duo E6600 or higher. ) · O/S : Windows XP (Home / Professional / Media Center Edition) with SP2/ Windows Vista (X86, X64) with SP1/ Windows 7 · RAM : 1 GB or more · HDD : 30 GB or more of available space (60 GB for Blu-ray Disc authoring) Interface Serial ATA Drive bay 12. 34 cm (5. 25-inch) half-height bay required Power +5 V/+12 V power socket required Recommended BD-R : LG, Sony, Panasonic. media manufacturer BD-RE : Mitsubishi Kagaku Media, Maxell, Sony, Panasonic. DVD-R :Mitsubishi Kagaku Media, Taiyo Yuden. DVD+R : Mitsubishi Kagaku Media, Verbatim. DVD+RW : Mitsubishi Kagaku Media, Verbatim. DVD±R DL : Mitsubishi Kagaku Media, Verbatim. CD-R : Mitsubishi Kagaku Media, Verbatim, Taiyo Yuden. CD-RW : LG, Mitsubishi Kagaku Media, Verbatim. Eject Button 4 Installing the Drive Before installing the drive, please note the following points. You will need the following: · A screw driver of a suitable size to fit the securing screws for the drive unit. · The manual for the computer, so you can find the mounting positions for the SATA cable. Turn off all peripheral appliances of the computer and the computer itself, and disconnect their power cords from the wall sockets. Discharge any static electricity on your person by touching the computer covers, etc. Removing the Computer Cover Make sure all peripheral devices of the computer and the computer itself are turned off, and then remove the cover. Refer to the manual for the computer for details about removing the cover. NOTE : There may be sharp edges inside the computer so take care to avoid injury. Mounting the Drive 1. Remove the a 51/4 drive bay panel from the computer. Refer to the manual for the computer for details. Do not apply excessive pressure to the cables inside the computer. If there is not much space behind the drive, connect the SATA and other cables before securing the drive. NOTE : This is a general installation guide. [. . . ] · Was the drive or disc moved from a low temperature environment to a high temperature environment?(There is a possibility of condensation on the lens in the drive or on the surface of the disc. ) · · When you call for service, be prepared to give as much information as possible of your system, environment, and the specific problem. Were there any error messages displayed?etc. ) Please Note: Since this product supports Regional Playback Control Phase II for DVD-Video with CSS, a certain MPEG decoder card or Software without regional code setting may cause this drive not to read DVD-Video with CSS discs. [. . . ]