User manual LG PTED1201DCC

[. . . ] · Use this button to select an icon or adjust the setting in the OSD screen. OSD Select / Adjust Button OSD Menu Navigation up and down : Zoom Hot key (Normal Zoom Zoom Full) : Select Menu Item, Decrement Value : Select Menu Item, Increment Value 6 User Menus Screen Adjustment options To change input source depending on connected signal. Press the SOURCE button on the remote control to select the input signal. Or, press the SOURCE button on the bottom of the product. DVI signal Digital signal SOURCE Button D-Sub signal 15-pin D-Sub analog signal IR Receiver · This is where the unit receives signals from the remote control. 7 User Menus OSD Menu Icon Function Description Adjusts screen brightness, contrast and color that you prefer. PICTURE Adjusts the screen size. ZOOM Adjusts the timer options. TIMER Adjusts the OSD image. OSD Note OSD(On Screen Display) The OSD function enables you to adjust the screen status conveniently since it provides graphical presentation. 8 User Menus How to adjust the OSD (On Screen Display) screen MENU MENU MENU Pops up the menu screen Move where you want to adjust Select a menu icon Move where you want to adjust Select a menu icon Adjust the status Save adjustment Exit from the menu screen. · Use the remote control to adjust the OSD screen. 1 2 3 4 5 6 Press the MENU Button, then the main menu of the OSD appears. To access a control, use the Buttons. When the icon you want becomes highlighted, press the Button. Use the Buttons to adjust the item to the desired level. Accept the changes by pressing the MENU Button. Exit the OSD by pressing the MENU Button. How to adjust the screen automatically Press the AUTO button on a remote Control in the PC analog signal. [. . . ] The off time automatically switches the set to standby at the pre-set time. 1) Press the MENU button and then use 2) Press the button and then use button to select Off Time or On Time. 3) Press the button and then use button to set the hour(00~23). 4) Press the button and then use button to set the minutes(00~59). 5) Press the MENU button. On/ Off Time Function To set automatic On/Off. On : Automatically turn the product On/Off at preset times. Off : Disable the On/Off Time function. Note In the event of power interruption (disconnection or power failure), the clock must be reset. Once the on or off time is set, these functions operate daily at the preset time. Off time function overrides On time function if they are set to the same time. When On time is operated, input screen is turned on as it was turned off. 14 User Menus Adjusting OSD image OSD OSD Set ID H-Position V-Position On-Screen Time Halftone Factory Reset 1 3 10 10 63 Move Select MENU Exit Set ID You can assign a unique Set ID NO (name assignment) to each product when several products are connected for display. Use the assigned Set number (1~99) using the ID to individually control each product using the Product Control Program. · D-Sub analog signal ­ Press the "AUTO" button in the remote control to automatically select an optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Clock OSD menu. · D-Sub analog signal ­ Press the "AUTO" button in the remote control to automatically select an optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Phase OSD menu. · The proper input signal is not connected to the signal port. Connect the signal cable that matches with the source input signal. G Do thin lines appear on the background screen? G Horizontal noise appears or the characters look blurred. G The screen is displayed abnormally. After-image appears on the product. G After-image appears when the product is turned off. · If you use a fixed image for a long time, the pixels may be damaged quickly. Use the screen-saver function. 17 Troubleshooting Screen color is abnormal. G Screen has poor color resolution (16 colors). · Set the number of colors to more than 24 bits (true color) Select Control Panel ­ Display ­ Settings ­ Color Table menu in Windows. · Check the connection status of the signal cable. · Several pixels (red, green, white or black color) may appear on the screen, which can be attributable to the unique characteristics of the LCD panel. [. . . ] Transmission Data(ASCII) L L [j][Set ID][m][Data][Cr] Min : 000 ~ Max : 100 Acknowledgement [OK] 04. Contrast(Command : n) To adjust screen contrast. You can also adjust the contrast in the Picture menu. Transmission [j][Set ID][n][Data][Cr] Data(ASCII) Min : 000 ~ Max : 100 Acknowledgement [OK] A5 RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 05. [. . . ]