User manual LG PTED1501GCC

[. . . ] Check your local electric code or consult a qualified electrician if you have questions. ABOUT GROUNDING (EARTHING) In the event of an electric short circuit, grounding (earthing) reduces the risk of electric shock by providing an escape wire for the electric current. In order to prevent possible electric shock, this appliance must be grounded. Improper use of the grounding plug can result in an electric shock. Consult a qualified electrician or service person if the grounding instructions are not completely understood, or if you have doubts on whether the appliance is properly grounded. ACCESSIBILITY SUPPLY PLUG The refrigerator-freezer should be so positioned that the supply plug is accessible for quick disconnection if an accident happens. SUPPLY CORD REPLACEMENT If the supply cord is damaged, it must be replaced by the manufacturer or replacement or a similarly qualified person in order to avoid a hazard. DO NOT MODIFY OR EXTEND THE POWER CORD LENGTH It will cause electric shock or fire. VERY DANGEROUS ATTRACTION An empty refrigerator can be a dangerous attraction to children. [. . . ] Wipe off all dust accumulated during shipping and clean your refrigerator thoroughly. Install accessories such as the ice cube box, evaporating tray cover, etc. , in their proper places. They are packed together to prevent possible damage during shipping. Connect the power supply cord (or plug) to the outlet. Don't double up with other appliances on the same outlet. Prior to use, let the refrigerator run for 2-3 hours. Check the flow of cold air in the freezer compartment to ensure proper cooling has taken place. Your refrigerator is now ready for use. 4 FEATURE CHART FREEZER COMPARTMENT Twisting Ice Service (Optional) or General Type Ice Tray Freezer Temperature Control Knob Shelf Egg Storage Rack Freezer Door Rack REFRIGERATOR COMPARTMENT Chilled Compartment Refrigerator Temperature Control Knob Shelves (Optional) Lamp Deodorizer (Optional) Movable Rack Refrigerator Door Rack Vitamin Kit (Optional) Vegetable Drawer Used to keep fruits and vegetables, etc. Leveling Screws NOTE All parts shown may not be included with every model. 5 OPERATION STARTING When your refrigerator is first installed, allow it 2-3 hours to stabilize at normal operating temperatures prior to filling it with fresh or frozen foods. If operation is interrupted, wait 5 minutes before restarting. BEFORE SETTING THE TEMPERATURE This refrigerator has one temperature control knob for the refrigerator compartment and one temperature control dial for the freezer compartment. The default setting of the temperature control knob for the refrigerator compartment is 'MID'. The default setting of the temperature control dial for the freezer compartment is '2' or '3'. CONTROLS FOR REFRIGERATOR COMPARTMENT MAX For colder temperatures, adjust the control knob to MAX, and for warmer temperatures, adjust the control knob to MIN position MID MIN TEMPERATURE CONTROL CONTROLS FOR FREEZER COMPARTMENT <A Type> <B Type> TEMP CONTROL - 1, 2, 3, 4, 5, 6, 7 . When storing eggs in their storage rack, ensure that they are fresh. Always store them in a upright position, which keeps them fresh longer. 9 CLEANING It is important that your refrigerator be kept clean to prevent undesirable odors. Spilled food should be wiped up immediately, since it may acidify and stain plastic surfaces if allowed to settle. Never use metallic scouring pads, brushes, coarse abrasive cleaners, or strong alkaline solutions on any surface. Before you clean, remember that damp objects will stick or adhere to extremely cold surfaces. Do not touch frozen surfaces with wet or damp hands. EXTERIOR - Use a lukewarm solution of mild soap or detergent to clean the durable finish of your refrigerator. Wipe with a clean, damp cloth and then dry. INTERIOR - Regular cleaning of the interior and interior parts is recommended. If you have the No Frost model which defrosts automatically, leave both doors open during the entire cleaning process. Disconnect the power supply, and remove food and all compartment shelves, storage trays etc. [. . . ] Open a window and do not breathe the vapors. To remove the lamp cover, insert a slotted driver at the one of under hole of the lamp cover and pull it out forwards. Assemble in reverse order of disassembly. Replacement bulb must be the same specification as original. BEFORE CALLING FOR SERVICE SERVICE CALLS CAN OFTEN BE AVOIDED! [. . . ]