User manual LG PTED1502JCC

[. . . ] Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. [. . . ] If you forget your password you can reset it. The lower the level, the stricter the rating. Select [Unlock] to deactivate the rating. Password ­ Sets or changes the password for lock settings. [New] : Enter a new 4-digit password using the numerical buttons then press ENTER. [Change] : Enter the new password twice after entering the current password. Area Code ­ Select a code for a geographic area as the playback rating level. This determines which area's standards are used to rate DVDs controlled by the parental lock. See the Area Codes on page 21. Enjoying a pre-programmed sound field This system has a number of pre-set surround sound fields. You can select a desired sound mode by using SPECIAL EQ/ NIGHT. You can change the SPECIAL EQ/ NIGHT using I i arrow key while the SPECIAL EQ/ NIGHT information is displayed on. Press PLAY (B) to continue play at normal speed. 14 PTED1502JCC-A2_DCHNLL_ENG_5807 7/24/09 11:16 AM Page 15 Selecting a subtitle language During playback, press SUBTITLE ( language. DVD DivX Viewing the DVD MENU DVD ) repeatedly to select a desired subtitle DVD DivX Press MENU to display the disc menu, if available. Changing the character set to display DivX® subtitle correctly DivX Slow down the playing speed While playback is paused, press SCAN (bb or BB) to slow down forward or reverse playback. You can change the various playback speed by pressing SCAN (m or M) repeatedly. Press PLAY (B) to continue play at normal speed. The DivX file cannot be slow down reverse playback. If the subtitle does not display properly during playback, press and hold SUBTITLE for about 3 seconds then press I i or SUBTITLE to select another language code until the subtitle is displayed properly and then press ENTER. DivX file requirement DivX 1. 5 times faster playback DVD Press PLAY (B) when a DVD is already playing to watch and listen to a DVD 1. 5 times faster than normal playback speed. "B x1. 5" will appear in the screen. Press PLAY (B) again to return to normal playback speed. If you insert the microphone during "x1. 5"speed playback, it returns to the normal play mode. This function is not operated when you cannot the microphone. Viewing the Title menu DVD Press TITLE to display the disc's title menu, if available. Starting play from selected time DVD DivX Searches for the starting point of entered time code. For example, to find a scene at 1 hour, 10 minutes, and 20 seconds, enter "11020" by using numerical buttons and press ENTER. if you enter the wrong number, press CLEAR to enter again. Last Scene Memory DVD This unit memorizes the last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off (Stand-by mode) the unit. [. . . ] The batteries in the remote control are flat. Humming noise heard while a DVD or CD is playing Radio stations can't be tuned in properly The remote control doesn't work well / at all 22 PTED1502JCC-A2_DCHNLL_ENG_5807 7/24/09 11:16 AM Page 23 Types of Playable Discs Type DVD-VIDEO : Discs such as movies that can be purchased or rented. DVD-R : Video mode and finalized only DVD-RW : Video mode and finalized only DVD VR format that have been finalized can not be played in this unit DVD+R : Video mode only Supports the double layer disc also DVD+RW : Video mode only Audio CD :Music CDs or CD-R/ CD-RW in music CD format that can be purchased. This unit plays DVD±R/ RW and CD-R/ RW that contains audio titles, DivX, MP3, WMA and/ or JPEG files. Some DVD±RW/ DVD±R or CDRW/ CD-R cannot be played on this unit due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. Logo About the Symbol Display " " may appear on your TV display during operation and indicates that the function explained in this owner's manual is not available on that specific DVD video disc. Regional Codes This unit has a regional code printed on the rear of the unit. [. . . ]