User manual LG PTHD1501DCC

[. . . ] Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. REGULATORY INFORMATION: FCC Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. [. . . ] PTZ protocol list > PTZprotocol:DisplaystheselectedPTZprotocol. > Edit:ClicktodisplaythePTZprotocolwindow. Select the PTZ protocol and then click the [Save] button. If you want to delete the protocol, click the [Remove] button. Upload PTZ protocol PTZ protocol Allows the user to configure to different PTZ controls by using different PTZ protocols. Follow the instructions below to upload PTZ protocol. Click the [Browse] button, find and open the file and then click [Upload] button. Click the [Add PTZ protocol] button and then the PTZ protocol will be added. PTZ configuration > Enable:ClicktousethePTZprotocol. > CameraID:EnterthePTZdeviceID. Makethesame Operation and settings 27 ID as the PTZ Device. > Panspeed:EnterthepanningspeedofthePTZ device in the edit box. Default value for the LG Multix Protocolis60andrangesbetween(0~127). Note: The available total time of pattern differs depending on connected PTZ device and operation. Click the [Play] button to play the programmed pattern. Click the [Stop] button to stop playing. Preset list Displays the registered preset position. · Note: If you set the HOME position, check the [Set home position] option. · Gotopreset:Movetothepresetposition. The camera will be moved to the selected preset. Preset tour list A preset tour is composed of a group of preset positions that the operator can link together in a sequence. > To tour the preset positions 1. · Add:Clicktoaddthepresetposition. Repeatthesteps1-4toaddotherpositions. Operation and settings 2. Click the [Add] button in the [Preset tour list]. [. . . ] Select the Night mode if the network camera is connected at a place where surrounding light is less or dark. If we obtain lower frame rate than set we need to check from the system administrator for sufficient bandwidth available or reduce the Reference 41 number of applications running on the client computer. · · · If the client PC's are unable to access the multicast stream, check with the system administrator for the use of a valid multicast address or check if the router is supporting multicasting. If the images appear to have white of gray stripes on it, upgrade the Video graphics driver on the client PC to the latest version. [. . . ]