User manual LG R5400

[. . . ] The manufacturer reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of the manufacturer to notify any person of such revision or changes. Trademark Recognition Kensington is a U. S. registered trademark of ACCO Brand Corporation with issued registrations and pending applications in other countries throughout the world. All other product names used in this manual are the properties of their respective owners and are acknowledged. --i-- DLP Projjecttor--User''s Manuall DLP Pro ec or--User s Manua Important Safety Information Important: It is strongly recommended that you read this section carefully before using the projector. These safety and usage instructions will ensure that you enjoy many years of safe use of the projector. [. . . ] The following illustration shows the corresponding buttons on the remote control and on the projector. 1. To enter the OSD, press the MENU button. Press the cursor button to move through the menus. Press the cursor button to move up and down in a menu. Press MENU to close the OSD or leave a submenu. Note: Depending on the video source, not all items in the OSD are available. For example, the Horizontal/Vertical Position items in the Computer menu can only be modified when connected to a PC. Items that are not available cannot be accessed and are grayed out. ­ 17 ­ DLP Projjecttor--User''s Manuall DLP Pro ec or--User s Manua Setting the OSD Language Set the OSD language to your preference before continuing. 1. Press the cursor button to navigate to Installation I. 2. Press the cursor button until Language is highlighted. 3. Press the cursor button until the language you want is highlighted. Press the MENU button twice to close the OSD. ­ 18 ­ DLP Projjecttor ­ User''s Manuall DLP Pro ec or ­ User s Manua OSD Menu Overview Use the following illustration to quickly find a setting or determine the range for a setting. ­ 19 ­ DLP Projjecttor--User''s Manuall DLP Pro ec or--User s Manua OSD Sub-Menu Overview ­ 20 ­ DLP Projjecttor ­ User''s Manuall DLP Pro ec or ­ User s Manua Image Menu Press the MENU button to open the OSD menu. Select to enter the Magenta Color Manager. Press the buttons to adjust the Hue, Saturation, and Gain. Select to enter the Yellow Color Manager. Press the buttons to adjust the Hue, Saturation, and Gain. Select to enter the White Color Manager. Press the buttons to adjust the Red, Green, and Blue. ­ 23 ­ DLP Projjecttor--User''s Manuall DLP Pro ec or--User s Manua Computer Menu Press the MENU button to open the OSD menu. Press the cursor button to move to the Computer menu. Press the cursor button to move up and down in the computer menu. Press to change values for settings. ITEM Horizontal Position Vertical Position Frequency Tracking Auto Image DESCRIPTION Press the cursor button to adjust the display position to left or right. Press the cursor button to adjust the display position to up or down. Press the cursor button to adjust the A/D sampling clock. [. . . ] Test the source audio output with other speakers. Have the projector serviced. Problem: The sound is distorted 1. Test the source audio output with other speakers. Have the projector serviced. Having the Projector Serviced If you are unable to solve the problem, you should have the projector serviced. [. . . ]