User manual LG R65W28

[. . . ] (1)Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production. Com A-2 TABLE OF CONTENTS TABLE OF CONTENTS A-3 SETTING UP THE TV A-3 A-4 Attaching the stand Tidying cables COMMON LANGUAGE LIST English Svenska Norsk Dansk Suomi LANGUAGE B-1 MAKING CONNECTIONS B-1 B-2 B-2 B-4 B-4 B-6 B-7 B-8 B-9 B-9 B-11 B-12 B-13 Antenna Connection Satellite dish Connection HDMI Connection - ARC (Audio Return Channel) DVI to HDMI Connection RGB-PC Connection Component Connection Composite Connection Audio Connection - Digital optical audio connection USB Connection CI module Connection Euro Scart Connection B-18 SPECIFICATIONS COMMON SETTING UP THE TV A-3 SETTING UP THE TV Image shown may differ from your TV. 50/60PM68**, 50/60PM97** Only 50PM68**, 50PM97** Attaching the stand 42/50PM47**, 50/60PM67** 1 Stand Body M5 x 16 3EA Stand Body Front Front Stand Base 1 M5 x 16 3EA Only 60PM68**, 60PM97** M5 x 16 5EA 2 Stand Base 2 3 3 M4 x 30 4EA 4 Cable management M4 x 30 4EA A-4 SETTING UP THE TV To detach the stand, 1 42/50PM47**, 50/60PM67** CAUTION y When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. Y Make sure that the screws are fastened completely. [. . . ] Wind the PC audio cable on the ferrite core thrice. (Gray) [to an External device] [Figure 1] 10 mm(+ / - 5 mm) ENGLISH ENG [to the TV] [Cross Section of Ferrite Core] 2 Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug. (Black) [to a wall plug] [Figure 2] [to the TV] [Cross Section of Ferrite Core] 3 Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN cable thrice on the ferrite core. Place the ferrite core close to the TV and an External device. [to an External device] A A [Figure 3] B A (Gray) [to the TV] [Cross Section of Ferrite Core] B (Gray) 4 Use the ferrite core to reduce the electromagnetic interference in the component Y, Pb, Pr, L, R cable. Wind the component Y, Pb, Pr, L, R cable on the ferrite core once. (Black) [to an External device] 10 mm(+ / - 5 mm) [to the TV] [Figure 4] [Cross Section of Ferrite Core] - If there are six ferrite cores, follow as shown in Figure 1, 2 and 3. - If there are seven ferrite cores, follow as shown in Figure 1, 2, 3 and 4. ENGLISH ENG CAUTION y Avoid touching the screen at all times, as this may result in damage to the screen. Y It is recommended to move the TV in the box or packing material that the TV originally came in. Y Before moving or lifting the TV, disconnect the power cord and all cables. Y When holding the TV, the screen should face away from you to avoid damage. Y When transporting the TV, do not expose the TV to jolts or excessive vibration. Y When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. Y Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. ASSEMBLING AND PREPARING 19 Mounting on a table 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (minimum) space from the wall for proper ventilation. Securing the TV to a wall (This feature is not available for all models. [. . . ] To display images by using progressive scan, make sure to use the euro scart cable. Y When watching digital TV in 3D imaging mode, TV out signals cannot be output through the SCART cable. (Only 3D models) y If you set the 3D mode to On while a scheduled recording is performed on digital TV, monitor out signals cannot be output through the SCART cable, and the recording cannot be performed. For more information of external device's connection, refer to the manual provided with each device. [. . . ]