User manual LG RC299

[. . . ] Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. [. . . ] The everything recorded on the DVD will be erased after formatting. The disc format for DVD-R, DVD+R, DVD+RW, discs is always "Video" format the same as pro-recorded DVD-Video discs. (You can play a DVD-R, DVD+R, DVD+RW, discs in a regular player). If you load a completely blank disc, the unit will initialize the disc automatically. See "Formatting mode (new disc)" on page 5 for more information. Finalize ­ Finalizing is necessary when you play disc recorded with this unit on other DVD equipment. How long finalization takes depends on the disc condition, recorded length and number of titles. [Finalize]: The [Finalize] menu appears. The unit starts finalizing after confirmation. [Unfinalize]: The finalized DVD-RW discs can be unfinalized after confirming on the [Unfinalize] menu. After unfinalizing, the disc can be edited and rerecord. 17 Before finalizing, check the characteristics between the disc type in the table below. Use v V to select the angle option then use b B to select desired angle. a Indicates disc name and format. b Indicates the record mode, free space, and elapsed time progress bar. c Indicates channel number, station name, and audio signal (STEREO, MONO) received by the tuner. e Indicates current date and time. Selecting a sound mode DVD ALL DivX This unit can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five or more speakers normally required to listen to multi-channel audio from a home theater system. During playback, press DISPLAY twice to display the playback menu. Use v V to select the sound option then use b B to select desired sound mode (3D SUR. or NORMAL). 19 Play a Tape ON REMOTE 1 Press VCR to control the VCR deck: 2 Insert a prerecorded video cassette: 3 Starts playback: If a tape without a safety tab is inserted, the unit starts playback automatically. Hearing a different audio TAPE Press AUDIO then sets tape audio to HIFI, LEFT, RIGHT or NORMAL. Use b/B buttons to select tape audio you want. VCR N PLAY (N) Counter Memory Function TAPE Resets the current tape counter position to 0:00:00 by pressing CLEAR. To automatically go to tape counter position 0:00:00, press RETURN while the tape is in Stop mode or in Play mode. 4 Stops playback: x STOP (x ) Play a disc ON REMOTE 1 Open the disc tray: 2 Insert a disc: 3 Close the disc tray: 4 Adjust the disc menu settings: A disc menu may not appears on the screen depending on the disc. Play a tape - more you can do Tracking Control TAPE If noise appears on the screen during playback, press either PR/CH(TRK) (v/V) on the remote control or PROG. (v/V) on the front panel until the noise on the screen is reduced. Z EJECT OPEN/CLOSE (Z) Z EJECT OPEN/CLOSE (Z) vVbB Pause playback and Frame-by-Frame playback TAPE Press PAUSE/STEP (X) to pause playback. Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback. [. . . ] b Subtitles are not recorded on the DVD Video being played. b The subtitle cannot be changed for the titles recorded on this unit. b The files are not recorded in a format that the unit can play. b The unit does not support the codec of the DivX movie file. b The video signal from the external component is copy-protected. [. . . ]