User manual LG RC68227

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. [. . . ] The on-screen display appears on the TV screen. The Time Search box shows the elapsed playing time of the current disc. Within 7 seconds, use s/w to select the Time Search icon in the on-screen display. The "-:--:--" appears in the Time Search box. Within 7 seconds, use the number buttons to enter the required start time. Enter hours, minutes, and seconds from left to right in the box. If you enter the wrong numbers, press a/d to move the under bar (_) to the wrong number. Then enter the correct numbers. Camera Angle If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback. Press a/d repeatedly to select a desired angle. The Camera Angle icon is displayed on the TV screen when alternate angles are available. , Note 40 Operating Changing the Audio Soundtrack Press AUDIO then press a/d repeatedly during playback to hear a different audio language or audio soundtrack if available. Some discs feature both Dolby Digital and DTS soundtracks. It will be automatically selected by the Recorder. If the tape reaches the end before STOP (Z) is pressed, the Recorder will automatically stop, rewind and eject the tape, and turn itself off. y If you wish to watch the DVD playback during the VCR playback, press DVD (or DVD/VCR) to change to DVD mode and perform the DVD playback. y You cannot playback for the both DVD and VCR at the same time. 4 Operating Special Effect Playback Special effects playback notes y Horizontal lines (noise bars) will appear on the TV screen. y The audio is automatically muted during special effect modes, so there is no sound during search. y During the high-speed picture search modes, a short time is needed to stabilize tape speed when re-entering the PLAY mode. Slight interference may be observed during this time. Search This function lets you visually search forward and backward for a desired scene on your tape. The Recorder will be activated in the SEARCH mode. y If the Recorder is left in the SEARCH mode for more than 3 minutes, the Recorder will automatically enter the PLAY mode, to protect the tape and video heads. To return to playback, press z(PLAY). , Note 42 Operating Still Picture and Frame-by-Frame Playback 1. [. . . ] While holding down 1 (TV POWER) button, and press the manufacturer code for your TV with the numerical buttons (see the table below). Manufacturer LG Zenith GoldStar Samsung Code Number 1(Default), 2 1, 3, 4 1, 2 6, 7 8, 9 4 By pressing 1 (TV POWER) AV/INPUT You can Turn the TV on or off. Switch the TV's input source between the TV and other input sources. Scan up or down through memorized channels. [. . . ]