User manual LG RCG20IERFWW

[. . . ] Use of controls or performance of procedures other than those specified herein may result in hazardous radiation exposure. WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Industry Canada requirement This class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. FCC COMPLIANCE STATEMENT Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] (The disc can also be ejected manually. ) Combination CD-R/RW, DVD-R/RW, DVD-R DL, DVD+R/RW, DVD+R DL, DVD-RAM Drive functions into one drive. Supports Region playback control Phase II. Automatic buffer underrun error prevention technology. Supports LightScribe Direct Label Printing Technology - *Optional. You can use a variety of Drive GH22LS40 LightScribe Supported RCG20IERFWW Not Supported System Environment Computer This unit can be operated in the system environment explained here. System requirements VGA Card Memory Hard disk CPU: Motherboard that supports Serial ATA. (Recommended Pentium IV 3. 2GHz or higher. ) RAM:512MB or higher. 128MB or greater. (The free space needed for writing depends on the quantity of data. ) Interface Serial ATA Drive bay 5. 25-inch half-height bay required Power +5V/+12V power socket required Software Required OS Windows Vista(X86, X64)/Windows XP[Home Edition/ Professional/Media Center Edition], Direct X 9. 0 or Higher is required CD-R, CD-RW, CD-R : LG, Mitsubishi Kagaku Media, Verbatim, Taiyo Yuden or TDK discs DVD-R, DVD-RW, are recommended. DVD+R, DVD+RW, CD-RW : LG, Ricoh, Mitsubishi Kagaku Media, Verbatim discs are DVD-RAM, recommended. DVD±R DL discs DVD-R : Maxell, Mitsubishi Kagaku Media, Taiyo Yuden are recommended. DVD-RW : JVC, Mitsubishi Kagaku Media are recommended. If there is not enough space behind the drive, connect the SATA and other cables before securing the drive. Mounting the Drive READ WRITE READ WRITE NOTE : This is a general installation guide. If your PC hardware appears different, please consult your hardware manual for installing peripheral devices. 4 PC Connection The Super Multi DVD Rewriter connects to the motherboard of the host computer using a SATA interface cable. Connecting the SATA Power Cable Connect the power cable so the projection of the cable connector side to come to the left side. NOTE : Improper connection may damage the drive and void the warranty. Generally, the power connector can only fit one way. Red Connect to the power connector of the PC. Connecting the SATA Data Cable Connect the data cable. Be careful not to connect upside down. Connect to the SATA connector on the PC's Motherboard. 5 Device Drivers When using Windows 2000 Professional/XP Home Edition/XP Professional/Vista, no special device driver is required. Your system, upon Power On and bootup after installing and connecting the new Super Multi DVD Rewriter, will recognize and load native software drivers automatically. Please consult the following internet sites: http://www. lgservice. com (then choose your country from the list) For Windows 2000/XP/Vista Users In order to ensure normal drive operation, please check the following: · The drive is displayed in Windows 2000/XP : [Control Panel]-[System]-[Hardware]-[Device Manager][DVD/CD-ROM-drives] Windows Vista : [Control Panel]-[Device Manager]-[DVD/CD-ROM-drives] · 32-bit is displayed in [Control Panel]-[System]-[Performance] If the drive is not recognized by your computer, please check the following items. · If an indicator is displayed on the IDE controller in [Control Panel][System]-[Device Manager]-[Hard Disk Controller], you will need to contact your PC's manufacturer or the motherboard's manufacturer and get the appropriate IDE controller driver. Run Add New Hardware in Control Panel to let PC search again for new device. Software Install the appropriate CD Recording Authoring Software before using this unit. * Please uninstall any previous CD burning software you may have loaded on your PC in order to prevent possible compatibility issues. [. . . ] Poke a fine-tipped object (such as a straightened heavy duty paper clip) into the small hole above the eject button. The front door will pop open and the disk tray will come partway out. Pull the front door to open it all the way, then grip the disc tray between thumb and forefinger and gently pull it straight out. 3) NOTE: This feature is a last measure to be used only in an emergency. 2. 0 & Higher): 2X, 3X, 5X, 6X, 8X, 12X CD-R: 4X, 8X, 16X, 24X, 32X, 40X, 48X CD-RW: 4X, 10X, 16X, 24X, 32X Horizontal/Vertical CD-ROM : 7200 Kbytes/s (48X max) DVD-ROM : 22160 Kbytes/s (16X max) SATA Gen. 1 1. 5Gbps CD-ROM: 125ms (Typical) DVD-ROM : 145ms (Typical) DVD-RAM : 270ms (Typical) 2 Mbytes 100000 Power On Hours (Duty Cycle 10%) Temperature: 5 °C to 50 °C Humidity: 15% to 85% R. H. [. . . ]