User manual LG RE1683F

[. . . ] If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Do not put heavy objects on the product or sit upon it. - If the product collapses or is dropped, you may be injured. [. . . ] To use this feature, select On. Balance Use this function to balance sound from the left and right speakers. Speaker You can adjust internal speaker status. If you want to use your external hi-fi stereo system, turn off the internal speakers of the set. Note When connected to your computer and the 'SSM' setting in the audio menu is Flat, Music, Movie or Sports, the available menus are Balance, AVL and Surround MAX . 25 Selecting and Adjusting the Screen Adjusting the timer function Clock Off time On time Auto sleep Clock If the time is on the clock is incorrect, reset the clock manually. 1) Press the MENU button and then use button to select the TIME menu. 2) Press the button and then use button to select the Clock menu. 3) Press the button and then use button to set the hour(00~23). 4) Press the button and then use button to set the minutes(00~59). Off / On time The off time automatically switches the set to standby at the pre-set time. 1) Press the MENU button and then use 2) Press the button and then use 3) Press the button and then use 4) Press the button and then use 5) Press the button and then use button to select the TIME menu. button to select On or Off. Auto sleep If Auto sleep is active and there is no input signal, the set switches to standby mode automatically after 10 minutes. 1) Press the MENU button and then use 2) Press the button and then use button to select On or Off. Note In the event of power interruption (disconnection or power failure), the clock must be reset. Once the on or off time is set, these functions operate daily at the preset time. Off time function overrides On time function if they are set to the same time. The set must be in standby mode for the On time to work. - Configuration of an integration screen is also available as well as configuration of One by one Display. - Tile mode (product 1 ~ 4) : r(2) x c(2) row ID 1 ID 2 column ID 3 ID 4 28 Selecting and Adjusting the Screen Selecting the options - Tile mode (product 1 ~ 9) : r(3) x c(3) row ID 1 ID 2 ID 3 ID 4 ID 5 ID 6 column ID 7 ID 8 ID 9 - Tile mode (product 1 ~ 2) : r(2) x c(1) row ID 1 ID 2 column - Tile mode (product 1 ~16) : r(4) x c(4) row ID 1 ID 2 ID 3 ID 4 ID 5 ID 6 ID 7 ID 8 column ID 9 ID10 ID 11 ID 12 ID 13 ID 14 ID 15 ID 16 29 Selecting and Adjusting the Screen Selecting the options Language Child lock ISM Method Set ID Tile Mode Power Indicator Logo light Demo Tile Mode Tile ID H-Size V-Size H-Position V-Position Reset Off 0 0 0 To set · Tile ID · H Size · V Size · H-Position · V-Position · Reset Select the location of the Tile by setting an ID. Adjust the horizontal size of the screen taking into account the size of the bezel. Adjust the vertical size of the screen taking into account the size of the bezel. Moving the screen position horizontally. Function to initialize and release Tile. All Tile setting are released when selecting Tile recall and the screen returns to Full screen. Power Indicator Use this function to set the power indicator on the front side of the product to On or Off. If you set On at any time, the power indicator will automatically be turned on. Use this function to set the Logo Display Lamp on the front side of the product to On or Off. If you set On, the lamp will automatically be turned on. Use it to see the difference between XD demo on and XD Demo off. (XD Demo function is not available in RGB PC/ HDMI/DVI PC mode. ) Logo Light Demo 30 Selecting and Adjusting the Screen Adjusting Screen CLOCK/PHASE and Position Auto config. [. . . ] Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 1 : Inversion 2 : Orbiter 3 : Orb. +Inv. 4 : White Wash 8 : Normal L Acknowledgement [p][ ][Set ID][ ][OK][Data][x] A11 RS-232C Controlling the Multiple Product Transmission / Receiving Protocol 18. Auto Configure(Command: j u) To adjust picture position and minimize image shaking automatically. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 1 : To set Acknowledgement [u][ ][Set ID][ ][OK][Data][x] L 19. [. . . ]