User manual LG RH177

[. . . ] Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service centre. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. [. . . ] or NORMAL). 23 RH387M-P_MHEG_ENG 8/28/08 2:41 PM Page 24 Displaying information while watching TV Whilst using the HDD/DVD recorder to watch TV, Press INFO (i) to display the information displayed on-screen. e a b c Changing TV program Use PR(+/-) on the remote control to change the programs in memory or use numbered (0-9) buttons to select a program directly. Changing program with numbered (0-9) buttons may not available when you are using digital text service. Changing TV program with program list You can display the TV program list using the PR LIST button and switch to other TV programs on the channel list. While watching a program, press PR LIST to display the TV program list. Select your desired channel using the v / V and press OK( ) to change the TV program. d Switching the program list You can switch the program list to DIGITAL TV, ANALOG TV or RADIO. Press v to move the highlight position to top of the program list. Press b B to select a [DIGITAL TV], [ANALOG TV], or [RADIO]. Selected program list appears. a Indicates channel number, station name, and audio signal (Stereo, Bilingual, Mono) received by the tuner. (The audio signal indication is available only for the analog channels. ) b Indicates media name and format. c Indicates the record mode, free space, and elapsed time progress bar. e Indicates program title, start time, end time, etc. You can check the programming on the Timer Record List menu (see page. To cancel the timer recording, select the program then press the red coloured button. Select the option again then press OK( ). The timer icon disappears. 25 RH387M-P_MHEG_ENG 8/28/08 2:41 PM Page 26 Viewing a digital text service Many digital TV channels broadcast information via their text service. This digital service includes high quality digital text and graphics along with advanced navigation options. Additionally, this recorder has access to dedicated text channels transmitted by the broadcasters. The appearance, content and navigation methods of all digital text services are decided by the broadcaster. Press TEXT to bring up the text menu for the current channel. Additionally you now have the four coloured buttons (Red, Green, Yellow and Blue) to navigate through the content of the page. The use of these coloured buttons will be displayed on the screen. Press TEXT or BACK (O) to leave the digital text service. Play a disc ON REMOTE 1 Open the disc tray: 2 Insert a disc: 3 Close the disc tray: 4 Adjust the disc menu settings: A disc menu may not appears on the screen depending on the disc. [. . . ] While holding down TV POWER button, and press the manufacturer code for your TV with the numerical buttons (see the table below). Release the TV POWER button to complete setting. Manufacturer LG / GoldStar Zenith Samsung Sony Hitachi Code Number 1 (Default), 2 1, 3, 4 6, 7 8, 9 4 HDMI The connected HDMI device does not display any picture. b b b b Try disconnecting then reconnecting the HDMI cable. Try switching the power of the HDMI device off then back on. [. . . ]