User manual LG RM-32LZ50

[. . . ] LCD Color Television OWNER'S MANUAL MODEL: RM-32LZ50 Please read this manual carefully before operating your set. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. Internet Home Page : http://www. lge. com http://www. lg. ca P/NO : 3828TUL274U(0410-REV05) Printed in Korea Warning Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] - Stereo: The primary language is heard from left and right speakers. - SAP: The secondary language is heard from left and right speakers. 1. Press the MTS button repeatedly. Mono Stereo SAP · Select mono sound mode if the signal is not clear or in poor signal reception areas. · Stereo, SAP mode are available only if included on the broadcast signal. 20 Operation T imer Menu Options Auto Clock Setup - The time is set automatically through from a PBS broadcast signal. - The PBS channel signal includes information for the correct time and daylight saving time. Timer Clock Off timer On timer Auto off Auto Manual G Auto Clock Time zone Auto PBS Ch. Auto D FG E FG OK MENU Move D E Adjust  Exit 1. Press the G G G D /E button to select the Timer menu. button and then use button and then use button and then use D / E button to select Clock. D /E D /E button to select Auto. button to select the time zone for your viewing area. (Pacific Standard Time), Alaska, and Hawaii. 5. Press the G button and then use D /E button to set PBS channel. 6. Press the G button and then use D / E button to set D. S. T. (Daylight Savings Time) Auto, Off or On, depending on whether or not your viewing area observes Daylight Savings Time. Press the ENTER button to save. Manual Clock Setup - If the time on the clock is incorrect, reset the clock manually. Press the MENU button and then use D menu. Press the G G G G /E button to select the Timer Timer Clock Off timer On timer Auto off Auto Manual --:-AM button and then use button and then use button and then use button and then use D /E D /E D /E D /E button to select Clock. Press the ENTER button to save. D FG E OK MENU 21 Operation T imer Menu Options continued On/Off Timer Setup On/Off Timer function operates only if current time is set. Off-Timer function overrides On-Timer function if they are set to the same time. The TV must be in standby mode for the On-Timer to work. If you don't press any button within 2 hours after turning on the TV with the On-Timer function, the TV will automatically revert to standby mode. D /E 1. Press the MENU button and then use menu. Press the timer. G button to select the Timer button and then use button and then use button and then use D /E button to select Off timer or On Timer Clock Off timer On timer Auto off - - : - - AM TV 2 Volume 30 Run 3. Press the G G D /E D /E button to set the hour. [. . . ] Transmission [m][b][ ][Set ID][ ][Data 0][Cr] Data0: (Channel)Delete-0, (Channel)Add-1 Acknowledgement [b][ ][Set ID][ ][OK][Data0][x] [b][ ][Set ID][ ][NG][Data0][x] 11. Sharpness (Command:k) G To adjust the screen sharpness. You can also adjust sharpness in the Picture menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64 · Refer to `Real data mapping 1'. [. . . ]