User manual LG RT-34FB11RB

[. . . ] Do not use for many hours at extremely low or high temperature. (-10~60C) To reduce the risk of electric shock, do not remove the cover or back of this product. There are no user-serviceable parts inside. Refer servicing to qualified service personnel. [. . . ] For safety, turn off the ignition before cleaning, and remove the key from the ignition switch. CAR CD/MP3/WMA Receiver 5 Installation Basic Installation Bend the claws according to the thickness of the dashboard ISO-DIN Installation Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. 1 2 3 4 Remove the existing receiver unit. Install the unit into the installation sleeve. 4 5 6 3 2 1 2 1 3 4 5 6 Control panel Control panel Slide the unit into the ISO-DIN frame. Slide the unit and frame into the dash opening. Install the dash panel or adapter plate. Install the control panel to the unit. Removing the existing receiver unit A If there is already an installation sleeve for the receiver unit in the dashboard, it must be removed. 1 2 Remove the rear support from the unit. Remove the control panel and trim ring from the unit. Insert the lever A into the hole on one side of the unit. Perform the same operation on the other side and pull the unit out from the mounting sleeve. A 3 6 CAR CD/MP3/WMA Receiver Connection Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits. A 1 5 2 6 3 7 4 8 1 5 B 2 6 3 7 4 8 Power Antenna Control Relay A8 A7 A2 A1 A5 Power Antenna(Blue) Dimmer(Pink) To Ignition(Red) To Battery(+)(Yellow) Ground(-)(Black) BAT T E Y R Dimmer Switch Ignition Switch B1 B2 B3 B4 B5 B6 B7 B8 B B B B B B B B 1 2 3 4 5 6 7 8 Violet / Black Stripe : Rear Right Violet : Rear Right + Gray / Black Stripe : Front Right Gray : Front Right + Green/ Black Stripe : Rear Left Green : Rear Left + White/Black Stripe : Front Left White : Front Left + A 3/ A 4/A 6 Not connected CAR CD/MP3/WMA Receiver 7 Basic Operation ON PLAYER 1. Any Key SRC Rotate PWR Adjusting the sound level Press SEL repeatedly to select the mode you want to adjust from VOL(volume), BAL(left/right speaker), and FAD(front/rear speaker). Bit rate / within 8 - 320kbps (include VBR) (MP3) 32 -320kbps (WMA) 3. CD-R/CD-RW file system should be "ISO 9660" 4. If you record MP3/WMA files using software which cannot create a FILE SYSTEM, for example "Direct-CD" etc. , it will not be possible to playback MP3/WMA files. We recommend that you use "Easy-CD Creator" which creates an ISO9660 file system. Customers should also note that permission is required in order to download MP3/WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. Search for a section within a track / file 1. During playback, press -?b / B?+ on the player for longer than 1 second and then release. Press -?b / B?+ on the player again at the point you want. Skip to another track / file Press -?b / B?+ on the player. To skip to previous track, press briefly -?b within 3 seconds of playing time. Intro scan Press or press and hold INT on the player. Each files in the current selected folder ( INT) or the first 10 seconds of each tracks/files (INT) on the disc are played. [. . . ] Press and hold MENU Press MENU Rotate PWR Press MENU AF(Alternative frequency) ON / OFF When the reception quality drops, the tuner automatically changes to another station in the network, broadcasting a better reception quality, using the PI and AF codes. REG (Region) ON / OFF REG ON : The unit switches to another station, within the same network, broadcasting the same program when the receiving signals from the current station become weak. REG OFF : The unit switches to another station, within the same network when the receiving signals from the current station become weak. (This mode, the program may differ from the one currently received. ) CAR CD/MP3/WMA Receiver 11 Troubleshooting Symptom Cause Correction General Power doesn't turn on / The unit doesn't operate. Leads and connectors are not properly. [. . . ]