User manual LG RT-44SZ23RB

[. . . ] Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. [. . . ] Use v V to select the subtitle option then use b B to select desired subtitle language. Watching from a different angle DVD If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback. During playback, press DISPLAY twice to display the playback menu. Use v V to select the angle option then use b B to select desired angle. Selecting a sound mode DVD ALL Play a disc ON REMOTE 1 Open the disc tray: 2 Insert a disc: 3 Close the disc tray: 4 Adjust the disc menu settings: A disc menu may not appears on the screen depending on the disc. 5 Starts playback: 6 Stops playback: Z OPEN/CLOSE (Z) Z OPEN/CLOSE (Z) v V b B, ENTER DivX This unit can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five or more speakers normally required to listen to multi-channel audio from a home theater system. During playback, press DISPLAY twice to display the playback menu. Use v V to select the sound option then use b B to select desired sound mode (3D SUR. or NORMAL). N PLAY (N) x STOP (x ) 20 RH387H-P_BITALLK-ENG 6/10/08 4:19 PM Page 21 Play a disc - more you can do Playing a disc that contains a menu DVD The menu screen may be displayed first after loading a DVD which contains a menu. Use the b / B / v / V buttons to select the title/chapter you want to view, then press ENTER to start playback. Press TITLE or MENU/LIST to return to the menu screen. Slow down the playing speed HDD DVD ALL While playback is paused, press SCAN(bb or BB) to slow down forward or reverse playback. You can change the various playback speed by pressing SCAN (m or M) repeatedly. Press PLAY ( N)to continue play at normal speed. Viewing the Title menu DVD Press TITLE to displays the title menu or disc menu. If a bitrate of DivX file on the USB is over 4Mbps, the file may not be played properly. [Play]: Starts playback the selected file. [Open]: Opens the folder and a list of files in the folder appears. [Delete]: Deletes the file(s) of folder (s) from the hard disk drive. [Rename]: Edits the file name in the HDD. [Move]: Moves selected file(s) to another folder in the HDD. [Copy]: Copies a file(s) to another folder in the HDD. Displaying movie file information Press DISPLAY to show file information on the highlighted file in the movie list. 22 RH387H-P_BITALLK-ENG 6/10/08 4:19 PM Page 23 Selecting multiple files or folders on the list You can select not only single file but also multiple files using MARKER button. Press MARKER at the desired files to select multiple files. Selecting all files and folders on the current list If you want to select all files and folders on the list, press CLEAR at any file or folder on the list. Press CLEAR again to deselect files and folders. Naming a file or folder on the HDD You can name a file or folder on the HDD. The length of a name can be up to 32 characters long. Copying file(s) or folder(s) to the HDD You can copy file(s) or folder(s) to the HDD. Select file(s) or folder(s) you would like to copy then press ENTER. [. . . ] b Connect the audio connection securely. b The input source setting on the amplifier or the connection to the amplifier is incorrect. b The unit is in scan, slow motion, or pause mode. The remote control does not work properly. b The resolution is higher than the unit can support. b b b b The remote control is not pointed at the remote sensor of the unit. The remote control is too far from the unit. There is an obstacle in the path of the remote control and the unit. [. . . ]