User manual LG S18AN ST0

[. . . ] In order to allow the proper operation of all safeguards incorporated in this TV set, observe the following basic rules for its installation, use and servicing. Keep it in an accessible place for future reference. On Safety The power supply cord is used as the main disconnect device. Ensure that the socket-outlet is easily accessible after installation. Operate the TV set only from a power source indicated in the specifications of this manual or listed on the TV set. [. . . ] Select the next position by pressing the button and then take your choice of the second character, then press OK button. Repeat the 'Manual programme tuning' steps 5 to 8. MUTE POWER Fine tuning Normally fine tuning is only necessary if reception is poor. 1 4 7 PSM CBC 2 5 8 0 EQ/* 3 6 9 SSM LIST 1. Repeat the 'Manual programme tuning' steps 1 to 3. Press the button to fine tune for the best picture and sound on the Fine pull-down menu, then press OK button to store the setting. SEARCH FINE STORAGE SYSTEM NAME CHANNEL Q-VIEW SLEEP PR OK PR MENU 4. Press the TV/AV button to return to normal TV viewing. Change of " " from Yellow to red indicates tuning is proper. Programme edit This function enables you to swap or skip the stored programmes. Repeatedly press the MENU button to select the programme menu. Press the button and then button to select programme edit. Press the button to display the programme edit menu. PROGRAMME MENU AUTO PROGRAMME MANUAL PROGRAMME PROGRAMME EDIT VOL VOL TV/AV ARC EYE/* SOUND PICTURE TURBO I/II SWAP SKIP 12 Setting up TV stations PROGRAMME MENU AUTO PROGRAMME MANUAL PROGRAMME PROGRAMME EDIT Swapping programme 1 . Select a programme to be swapped by pressing button. Select a second programme to be swapped by pressing button. Press the button and then button to select Contrast, Brightness, Colour, Sharpness or Tint. CONTRAST BRIGHTNESS COLOUR SHARPNESS PSM : USER 1 4 7 PSM CBC 2 5 8 0 EQ/* 3 6 9 SSM LIST Q-VIEW 3. Press the sub menu. button to make appropriate adjustments on each CONTRAST SLEEP PR OK PR MENU You can also select User or standard PSM setting by directly pressing PSM button. Press the OK button to store it for the picture User. Press the TV/AV button to return to normal TV viewing. Eye (option) In some models, the set will automatically adjust the picture according to the surrounding conditions. This will enable you to enjoy the most suitable picture according to the surroundings. Press the EYE/ button to switch the eye function on or off. When the eye function is On, the most suitable picture is automatically adjusted according to the surrounding conditions. in green does not appear continuously but the display. . . . . . . in yellow appears each time the picture condition changes. Note : If PSM or TURBO PICTURE key is pressed or any of the picture setting are varied, then EYE automatically switches off. [. . . ] Select the programme number where the VCR channel is stored. Connect the audio/video out sockets of the VCR to audio/video in sockets of the set and in sockets of the VCR to out sockets of the set. If the VCR is connected to the AV sockets on the set, press the TV/AV button to select AV. The VCR playback picture appears on the screen. [. . . ]