User manual LG S306GP SD1

[. . . ] · It is dangerous to alter or modify the unit's characteristics in any way. · The appliance must be installed in accordance with the relevant national legislation. · Should repairs be necessary, contact the nearest authorized Repair Service Center. Unauthorized servicing can be dangerous. [. . . ] If the + (E) or - (F) buttons are pressed for more than 2 seconds, the time runs rapidly up to a maximum of 24 hours. Press the timer button again within a few seconds to confirm the setting. If the setting is not confirmed within a few seconds, the display resets to Stand-by. With the timer activated, the countdown before the programmed start up time is displayed and the light (H) flashes. To cancel the timer programming, press the timer button (D) again. How to program delayed shutdown · Delayed shutdown can be programmed in any operating mode (air conditioning/dehumidifying/fan). The last timer setting or the preset value 6. 0 flashes on the display. · Use the + (E) or - (F) button to set the number of hours delay before the appliance goes off. During the first ten hours, you can select half hour intervals. For times greater than ten hours, one hour intervals can be selected. If the + (E) or - (F) buttons are pressed for more than 2 seconds, the time runs rapidly up to a maximum of 24 hours. Press the timer button again within a few seconds to confirm the setting. For times greater than ten hours, one hour intervals can be selected. · Press the timer button (19) again to confirm the selection. The appliance emits a beep and the light (H) flashes on the control panel, confirming successful activation of the timer. A countdown of the time left is displayed on the remote control display and the light (H) flashes on the air conditioner display. 11 Using the remote control · At the end of the set time the appliance switches off automatically. · To cancel the timer programming, press the timer button (19) again. The appliance emits a beep and both displays reset to display the settings prior to activation of the timer. How to program delayed start up · With the air conditioner off, press the press the timer button (19) . An arrow indicating "timer start-up" flashes on the display. Now make all the desired settings for when the appliance will switch on (operating mode, fan speed and temperature). Confirm the settings by pressing the timer button (19) . The time is displayed and the "h" symbol flashes. Set the time when you want the appliance to switch off using the buttons (from 30 minutes to 24 hours). [. . . ] absorbed power during air conditioning Refrigerant Cooling capacity see rating label " " " Transport, filling, cleaning, recovery and disposal of refrigerant should be performed by a technical service centre appointed by the manufacturer only. The appliance should be disposed of by a specialist centre appointed by the manufacturer only. LIMIT CONDITIONS Room temperature for air conditioning 64 ÷ 95°F (18° ÷ 35°C) NEVER TRANSPORT OR TURN THE APPLIANCE UPSIDE DOWN OR ON ITS SIDE. IF THIS OCCURS, WAIT 6 HOURS BEFORE TURNING THE APPLIANCE ON, 24 HOURS IS RECOMMENDED. (After the unit has been on its side, oil needs to return to the compressor to ensure proper function. [. . . ]