User manual LG SOLARDOM MP 9483SL & MP-9483SL,MV

[. . . ] 25 To cancel the time set for the minute minder: . 33 To switch "Rapid heat-up" off . 35 Using the residual heat, Energy-save function. 36 2 Contents Setting up User programmes . [. . . ] At the end of the programme the message "Programme finished" will appear in the display and the buzzer will sound. Using the residual heat, Energy-save function Shortly before the end of a set cooking time the oven heating switches itself off automatically. The message "Energy save phase" will appear in the display. The residual heat in the oven is sufficient to complete the cooking process. The cooling fan continues to run, as does the hot air fan if a "fan" setting had been chosen. To alter a set cooking time It is possible to check or change times entered for a cooking programme at any time by calling up the relevant symbol. To delete a set time ^ Switch off the oven. If there is a power cut, all data entered will be deleted. 36 Setting up User programmes Frequently used recipes can be saved under a user-defined name and then called up again as required. Select the option "Save" either during or at the end of a time controlled programme and enter a recipe name or use the "User programme" menu. You can save up to 30 user programmes and then call them up from the user programme menu. menu If you have not yet created a user programme only the word "create" will appear in the display. USER PROGS. Back A create ^ Select the option "create" USER PROGS. create Back A DEFROST AUTO ROAST GENTLE BAKE H ^ Select a function, e. g. ^ Change the recommended temperature if necessary. ^ Enter a duration. FAN PLUS Duration 01:30 h Duration OK 160 °C 9:52 ^ Check all your settings and then confirm your selection. To select the one you want SETTINGS F. CLOCK Back A 24 h-CLOCK 12 h-CLOCK B ^ Select and confirm the one you want. The time of day can then be set: Set time of day 12 : 00 Please set the time of day ^ Enter and confirm the hour. The time of day is now saved. Lighting The oven interior lighting can be set so that it goes out 15 seconds after a cooking programme has started, or so that it stays on throughout cooking. SETTINGS F. LIGHT Back A on on for 15 seconds B ^ Select and confirm the setting you want. 40 Changing settings Main menu The four cooking functions listed in the left-hand side of the display can be changed to show ones that you use frequently or to show your user defined programmes. SETTINGS F. MAIN MENU Back A 1. GRILL full H ^ Select and confirm the one you want to change. ^ Then select a new cooking function or one of your own programmes and confirm it. Catalyser The oven is supplied with the catalyser engaged for all functions except for Gentle Bake. SETTINGS F. CATALYSER Back A Factory default on off next prog. only H B If the catalyser is set to: ­ "on" it will also work during Gentle Bake. only" it will not come on during the next programme. ­ "Factory default" the settings the oven was supplied with will be re-instated. ^ Select and confirm the setting you want. 41 Changing settings Cooling fan The cooling fan will continue to run for a while after the oven has been switched off to prevent any humidity building up in the oven, on the control panel or in the oven housing unit. The fan is sensor controlled and will switch off automatically. You can change the factory default setting and set the cooling fan to switch off when the temperature in the oven is below about 70 °C or to switch off after a period of about 25 minutes. SETTINGS F. COOLING FAN Back A SENSOR CONTROLLED B TEMPERATURE CONTROLLED TIME CONTROLLED ^ Select and confirm the setting you want. [. . . ] The fuse rating is 16 A. WARNING THIS APPLIANCE MUST BE EARTHED. Test marks . C-Tick Mark Electrically suppressed according to. AS/NZS 1044 74 Installing the oven To ensure adequate ventilation to the oven once installed: - provide a ventilation cut-out in the housing unit as illustrated. - do not fit a rear panel into the housing unit. [. . . ]