User manual LG SOUNDPLATE440

[. . . ] The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to. CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. [. . . ] Controllable functions by LG TV’s remote control : Power on/off, volume up/down, etc. Refer to the TV owner’s manual for the details of SIMPLINK function. LG TV’s with SIMPLINK function has the logo as shown above. Depending on the state of the unit, some SIMPLINK operation may differ from your purpose or not work. 2 Connecting Note , , NB4530A-NE_BDEULLK_ENG. indd 17 2013-06-27 1:57:29 18 Connecting Optional equipment connection HDMI connection 2 Connecting For enjoying both sound and picture You can enjoy both sound and picture from the external device you connect. For enjoying sound only You can enjoy the sound from the external device you connect. Blu-ray disc player, DVD player, etc. 1. Connect HDMI IN jack on the back of the unit to HDMI OUT jack on the external device such as Blu-ray disc player, DVD player, etc. To the Blu-ray disc player, DVD player, etc. 1. Connect HDMI IN jack on the back of the unit to HDMI OUT jack on the audio device such as Bluray disc player, DVD player, etc. Press repeatedly FUNCTION on the remote control or F on the unit until the function is selected. 2. Connect HDMI OUT jack on the back of the unit to HDMI IN jack on the TV. Press repeatedly FUNCTION on the remote control or F on the unit until the function is selected. Note , , yy With the unit connected to external devices and TV as above illustration, TV will output picture and sound from external devices when the unit is turned off in HDMI IN mode. yy Even though PCM multi channel is inputted to the unit through an HDMI cable, the unit can only output 2 channel. NB4530A-NE_BDEULLK_ENG. indd 18 2013-06-27 1:57:30 Connecting 19 PORT. -- External HDD -- Card readers -- Locked devices -- Hard type USB devices -- USB hub -- Using USB extension cable Playable file MP3/ WMA file requirement MP3/ WMA file compatibility with this unit is limited as follows : yy Sampling frequency : within 32 to 48 kHz (MP3), within 32 to 48 kHz (WMA) yy Bit rate : within 32 to 320 kbps (MP3), 40 to 192 kbps (WMA) yy Maximum files : Under 999 yy File extensions : “. mp3”/“. wma” yy A protected file by DRM(Digital rights management) cannot be played on the unit. yy Video files in the USB storage device can not be played. NB4530A-NE_BDEULLK_ENG. indd 20 2013-06-27 1:57:31 3 Operating Operating 21 Basic operations USB operation 1. Connect the USB device to the USB port. 2. Select the USB function by pressing FUNCTION. 3. Select a file you want to play by pressing C or V. Do this Other operations DRC (Dynamic Range Control) Make the sound clear when the volume is turned down (Dolby Digital only). Set to [DRC ON] by using DRC. AV Sync When receiving audio signals from TV, sound and images may not be matched. In the case, this function can adjust the delay time. 2. Use C/V to scroll up and down through the delay amount, which you can set at anything between 0 and 300ms. 3 Operating During playback, press C or V to go to the next file Skip to the next/ or to return to the beginning of the current file. previous file Press C twice briefly to step back to the previous file. Search for a section within a file Press and hold C/V during playback and release it at the point you want to listen to. Press REPEAT on the remote control repeatedly, the display will be changed in the following order, RPT 1 RPT DIR (DIRECTORY) RPT ALL RANDOM OFF. [. . . ] yy The remote control is too far from the unit. Operate the remote control within about 23 ft (7m). No sound No display 4 Troubleshooting The remote control does not work properly. yy There is an obstacle in the path of the remote control and the unit. yy The batteries in the remote control is exhausted. yy Check the state of SIMPLINK and turn off SIMPLINK. [. . . ]