User manual LG STUDIOWORKS 221U(CB221BP)

[. . . ] Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. The information in this document is provided "as is" without warranty of any kind, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, and is subject to change without notice. The warranties for LG products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. [. . . ] Connect one end of the power cable to the back of the monitor, and the other end to an electrical wall outlet. WARNING: To reduce the risk of electical shock or damage to your equipment: Do not disable the cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. Disconnect power from the monitor by unplugging the power cord from the electrical outlet. Do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip on them. When unplugging from an electical outlet, grasp the cord by the unplug. Connecting the VGA Signal and Power Cable 3-2 User's Guide Setting Up the Monitor Connecting the DVI-D Signal Cable 4. Turn on the power source for both the computer and the monitor. CAUTION: Burn-in image damage may occur on monitors that display the same static image on screen for a prolonged period of time. To avoid burn-in image damage on your monitor screen, you should always activate a screen saver application or turn off the monitor when it is not in use for a prolonged period of time. Image retention is a condition that may occur on all LCD screens. 5. If your monitor includes a PC Comm Station, refer to the documentation included with the accessory for instructions on attaching it to your monitor. User's Guide 3-3 Setting Up the Monitor Adjusting the Monitor The monitor is attached to an adjustable pedestal that allows you to position the monitor screen for the best viewing in your particular environment. Adjust the item using the + or ­ buttons on the front panel to adjust the scale. After adjusting the function, select Save and Return, or Cancel if you don't want to save the setting, then select Exit from the Main Menu. If the buttons remain untouched for 10 seconds while displaying a menu, new adjustments will be discarded and the settings will revert to previous settings and exit the menu. Using the On-Screen Display There are two On-Screen Display menus available; one for basic adjustments, and one for advanced adjustments. To access the Basic OSD Menu, press the menu button on the monitor's front panel. Basic OSD Menu Levels Menu Level 1 Brightness Contrast Auto Adjustment Menu Level 2 Adjustment Scale Adjustment Scale 4-4 User's Guide Operating the Monitor Basic OSD Menu Levels Menu Level 1 Advanced Menu Exit Menu Level 2 To access the Advanced OSD Menu, press the menu button again, or select Advanced Menu from the Basic OSD Menu. After selecting the Advanced Menu from the Basic Menu, the Advanced Menu remains the default OSD on subsequent powerups of the monitor until the Basic Menu is selected or Factory Reset is applied. The Advanced OSD Menu has up to three sublevels and can be viewed in one of seven available languages. The following table provides the menus and their functions at each level: Advanced OSD Menu Levels Level 1 Brightness Contrast Image Control Level 2 Adjustment Scale Adjustment Scale Auto Adjustment Horizontal Position Vertical Position Clock Clock Phase Cancel Save and Return Level 3 Y Y "Adjusting" Message Y Adjustment Scale Adjustment Scale Adjustment Scale Adjustment Scale Y Y Y Y Factory Reset Color 9300 K sRGB-6500 K Y User's Guide 4-5 Operating the Monitor Advanced OSD Menu Levels (Continued) Level 1 Level 2 Custom Color Cancel Save and Return Language Deutsch English Espanol Francais Italiano Simplified Chinese Japanese Cancel Save and Return Management Power Saver Power On Recall Mode Display Sleep Timer Video Input Select Basic Menu Cancel Save and Return OSD Control Horizontal OSD Position Vertical OSD Position OSD Timeout Cancel Save and Return Factory Reset Yes Adjustment Scale Adjustment Scale Adjustment Scale Y Y Y On / Off Selection On / Off Selection On / Off Selection Timer Menu VGA/DVI Selection N N N N Level 3 Custom Color Adjustment Factory Reset OSD Transparency Adjustment Scale 4-6 User's Guide Operating the Monitor Advanced OSD Menu Levels (Continued) Level 1 No Exit Level 2 Level 3 Factory Reset Adjusting Screen Quality Allow the monitor to warm up for 20 minutes before performing the following procedures. The Auto-adjustment feature automatically fine-tunes the image quality each time a new video mode is displayed. If additional image quality improvement is desired, run the Auto-Adjust software on the CD and press the ­ (Minus) button on the monitor front panel to manually activate the Auto-Adjustment function. For more precise adjustments, run the Auto-Adjust software on the CD, and use the Clock and Phase controls of the monitor to fine-tune the image. Optimizing Analog Conversion This monitor contains advanced circuitry that allows the flat panel screen to function like a standard monitor. [. . . ] Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett Packard Company may void the user's authority to operate the equipment. User's Guide C-1 Agency Regulatory Notices Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations. Declaration of Conformity for Products Marked with FCC Logo, United States Only This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ]