User manual LG STUDIOWORKS 45I

[. . . ] Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer. Do not press on the panel or edge of the frame strongly, as this may result in the display malfunction, such as the interference patterns, etc. If pressure is continually applied to the LCD panel, it may deteriorate or damage your LCD panel. (If the pressure marks remain on the LCD panel, leave the monitor with a white or black screen. The symptom may disappear. ) Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in damage to the panel. Do not attempt to brush with tissues as this may scratch the LCD panel. When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation disappears, otherwise it may cause some damages to the monitor. Cleaning ATTENTION · Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may damage the cabinet or LCD panel. NOTE · Optional ScreenCleaner is recommended for cleaning the panel surface. LCD Panel · Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper. · Remove persistent stains gently with a cloth dampened with a little water, and then clean the LCD panel again with a dry cloth for better finishing. Cabinet · Clean the cabinet with a soft cloth dampened with a little mild detergent. To use the monitor comfortably · An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to the environmental conditions. After connecting the cable connectors, tighten the screws of the connectors to secure the coupling. PC monitor D-Sub mini 15-pin connector Signal cable MD-C87 (optional) D-Sub mini 15-pin connector or DVI connector Signal cable FD-C16 (optional) When using video equipment (1) Connect the monitor to the video equipment with a signal cable that matches the connectors. monitor Video equipment S-Video S-Video cable (Commercially available product) S-Video or Video Video cable (Commercially available product) Video 1 Chapter 2 Connecting Cables 2 Plug the power cord of the monitor into a power outlet. (1) Connect the power cord to the AC adapter. (2) Connect the AC adapter to the Power jack of the monitor, and after that, connect the power plug to a power outlet. ATTENTION · This product does not include a power cord. Please provide separately a power cord which meets the usage requirements. · For the maximum power saving, it is recommended that the Power button be turned off. Unplugging the power cord completely shuts off power supply to the monitor. 2-2. Adjusting the Screen Angle Hold left and right edge of the monitor with both hands, and adjust the tilt and swivel to the best condition for working. Chapter 2 Connecting Cables 1 Chapter 3 Settings and Adjustments 3-1. Basic Operation and Functions Basic operation of Setting menu 1 2 Displaying Setting Menu Press . Setting/Adjusting 3 Exiting Choose [Exit] with NOTE or , and press . · Keeping pressed for 2 seconds will also exit the Setting menu. 1 Chapter 3 Settings and Adjustments Functions The settings adjustable in the Setting menu are as shown below. The availability of items depends on the input signal. : Configurable : Not configurable Tab Color Setting / adjustable item Brightness Contrast Black Level Sharpness Saturation Hue PC Settings Clock Phase Position Range Adjustment Color Mode Red/Green/Blue Reset Reset Others Video Aspect Power Save Reverse Crosshair Color Width Beep Language Information PC Video page 17 Reference page 16 Chapter 3 Settings and Adjustments 1 3-2. Color Adjustment This will perform color adjustments. Please switch between the input screens you want to adjust and adjust them one by one. Adjustable item / adjustable value Brightness Contrast Black Level Sharpness Saturation Hue PC Settings *1 Adjusting Adjusts the brightness of the backlight. Adjust this when the screen appears to flicker or blur. [. . . ] The Afterimage can be removed gradually by changing the displayed image. Clock The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog input signal is converted to a digital signal for image display. If the clock pulse is not set correctly, some vertical bars appear on the screen. Phase Phase means the sampling timing to convert the analog input signal to a digital signal. Phase adjustment is made to adjust the timing. It is recommended that phase adjustment be made after the clock is adjusted correctly. Range Adjustment Range adjustment controls the signal output levels to display every color gradation. [. . . ]