User manual LG STUDIOWORKS 561N-CB561BN-

[. . . ] Switch off the phone in any area where are forced by special regulations. For example, the phone does not allow to be used in hospital because pacemakers and hearing aids can be affected. Minor interference may affect TVs, radios, PCs, etc. Do not hold the phone in your hand while driving. Do not dismantle phone or battery. ENGLISH Keep the phone in a safe place out of children's reach since it contains the detachable small parts and create a choking hazard. 4 Do not touch the charger with wet hands. For your safety, use ONLY specified ORIGINAL batteries and chargers. Please note: Unusable batteries should be disposed of in accordance with relevant legislation. Only use ORIGINAL accessories to avoid damage to your phone. Emergency call may not be available under all cellular networks. Therefore, you should never depend solely on the phone for essential communications such as medical emergencies. Important Information This user's guide contains important information on the use and operation of this phone. [. . . ] After sending it, your phone asks whether you will store the edited message. Press if you want to store it in Outbox and press don't want to. if you Save Stores the message in Outbox. Your phone asks whether you will save the edited message. Press if you want to save it in Outbox and press don't want to. if you Use template The template is pre-defined message. You can add the template of the list to the message when you edit it. Use namecard The items of the name card are a name, mobile, office, and memo. You can add a namecard to the message. ENGLISH 39 Messages [Menu 1] Accessing the Menu Add dictionary If you add a word you use often, you can input it by pressing a key once for each character. Scroll to highlight Add dictionary, and then press 3. [Select]. List dictionary You can view the list you already saved words in a dictionary. Scroll to highlight List dictionary, and then press 3. When you receive CB message, you can read it following sequence: Read [Menu 1-4-1] 1. When you receive CB message, it will be displayed on the screen. You can read the message by scrolling , . After reading the message, press to return to the standby mode. In addition, you can save it until another message is reached. Receive CB [Menu 1-4-2] Yes If you select this menu, your phone will receive the Cell Broadcast message. No If you select this menu, your phone will not receive the Cell Broadcast message any more. ENGLISH 45 Messages [Menu 1] Accessing the Menu Alert [Menu 1-4-3] Yes If you select this menu, your phone will beep when Cell broadcast message is received. No If you select this menu, your phone will not beep despite Cell broadcast message is received. Language [Menu 1-4-4] You can select the language you want. Then your phone will receive the cell broadcast message in the language selected by you. You can select Cell broadcast language pressing [Select]. The language list which you selected already will be displayed with check box. Topics(Dependent to network and subscription) [Menu 1-4-5] Add [Menu 1-4-5-1] If you select this menu, you will add the CB message category in Phone memory. View list [Menu 1-4-5-2] If you select this menu, you can see CB message category. If you press [Options], you can edit and delete it. ENGLISH Active list [Menu 1-4-5-3] You can select the CB message category in active list by pressing [Select]. 46 Accessing the Menu Voice messages [Menu 1-5] You can listen to your voice message(s) and get the voicemail centre number. Listen to voice message [Menu 1-5-1] You can call voicemail centre if you want to listen to voice message. Voice mailbox number [Menu 1-5-2] You can get the voicemail if this feature is supported by the network service provider. When new voicemail is arrived, the symbol will be displayed on the screen. [. . . ] [Menu] key 2-5 Adding Calls to the Multiparty Call To join an active call to the held multiparty call, select the key then Multiparty/Join all. [Menu] 2-6 Displaying Callers in a Multiparty Call To scroll through the numbers of the callers who make up a multiparty call on the handset screen, press and keys. 2-7 Putting a Member of a Multiparty Call on Hold To place one selected caller (whose number is currently displayed on-screen) of a multiparty call on hold, select the [Menu] key then Multiparty/Exclude. 2-8 A Private Call in a Multiparty Call To have a private call with one caller of a multiparty call, display the number of the caller you wish to talk to on the screen, then select the [Menu] key and Multiparty/Private to put all the other callers on hold. ENGLISH 91 In call Menu Additional Functions 2-9 Ending a Multiparty Call The currently displayed caller of a multiparty call can be disconnected by pressing the [End] key. To end a multiparty call, press the [Menu] key then select Multiparty/End multiparty. Selecting the [Menu] key then Multiparty/End all, will end all the active and held calls. 2-10 Explicit Call Transfer (ECT) If you have one caller on hold and another active call, you may connect one call party to another call party and then leave the call. [. . . ]