User manual LG STUDIOWORKS 77S(MB776BA)

[. . . ] AGENCY REGULATORY NOTICE FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] One end of the AC power cord is connected into the AC power connector on the back of the monitor. The other end is plugged into a properly grounded threeprong AC outlet. If you see the NO SIGNAL message, check the signal cable and connectors. After using the system, power OFF the monitor, then the PC. IBM PC MACINTOSH MIC. OUT IN D-15P Audio In Mic Out Signal Cable Mac Adapter D-15P Power Cord * NOTE : For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. A5 Location and Function of Controls Front View Left Side Jacks Front Panel Controls Rear View ID Label MIC. AUDIO OUT IN Audio IN Mic Out AC Power Socket D-Sub Signal Cable A6 Control Panel Function Front Panel Controls OSD Select /Adjustment Control Sound Mute Brightness Adjustment Control Built-in Microphone Power ON/OFF Button Sound Menu OSD ON/OFF Enter Button Contrast Adjustment Control Power (DPMS) Indicator Control OSD Select/ Adjustment Control Function Use this buttons selecting (highlighting) an OSD icon to be adjusted. It is also used for selecting the level of the selected item to be adjusted. Use this button to start/enter and exit from the On Screen Display. Used to select mute on (means sound off) and mute off (means sound on). Used to adjust the brightness of the screen. Adjust the display to the contrast desired. This Indicator lights up green when the monitor operates normally. If the monitor is in DPM (Energy Saving) mode (standby/suspend/power off), this indicator color changes to amber. Use this button to turn the monitor on or off. OSD ON/OFF Enter Button Sound Menu Sound Mute Built-in Microphone Brightness Adjustment Control Contrast Adjustment Control Power (DPMS) Indicator Power ON/OFF Button A7 Left Side Jacks Headphone Jack Headphone Jack that automatically mutes the speaker volume when headphone is attached. An external microphone can be used instead of the built-in microphone. Microphone Jack Rear Panel Jacks Mic. AUDIO OUT IN Connects microphone sound to PC via cable. Connects speaker sound to PC via cable attachment. Audio In Microphone Operation On the left side there is a MIC (Microphone) jack. By plugging a microphone in here, it may reduce the long length of cable needed to reach the PC's sound card. In order to use this MIC jack, you need to use a cable (supplied) to plug into the rear of the monitor (MIC OUT) and into the MIC input jack of your sound card (if available). Audio Features A major feature of this monitor is its built-in audio system. This conveniently integrates a stereo audio amplifier and speakers without taking up any more space. Because the monitor is designed like this, you can easily upgrade to audio capable multimedia applications by attaching your PC with sound card to the back of this monitor. [. . . ] The image on the SCREEN is not centered, or too small, or not a rectangle shape. Image adjustment not been done yet in the current operating mode. Use the SELECT and or buttons to set the image to your liking. The monitor doesn't enter the power saving off mode (Amber). [. . . ]