User manual LG STUDIOWORKS 995E(CB995D-EA)

[. . . ] Make sure to keep the package box for transporting the product in the future. Unpacking LCD Display 8 Introduction Manuals Quick Setup Guide Warranty Card (Not available in all locations) User's Guide Magic Wall Software CD, Magic Wall Manual CD Cables Power Cord Others Remote Control (BP59-00138A) Batteries (AAA X 2) (Not available in all locations) Sold separately D-Sub Cable DVI Cable LAN Cable Wall Mount KIT RGB to BNC Cable D-sub Cable 9 Introduction Sold separately Semi Stand KIT Your LCD Display Front MENU button [MENU] Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu or return to the previous menu. Navigate buttons (Up-Down buttons) Moves from one menu item to another vertically or adjusts selected menu values. Adjust buttons (Left-Right buttons) / Volume buttons Moves from one menu item to another horizontally or adjusts selected menu values. When OSD is not on the screen, press the button to adjust volume. ENTER button [ENTER] Activates a highlighted menu item. SOURCE button [SOURCE] Switches from PC mode to Video mode. Selects the input source that an external device is connected to. [. . . ] Note · · Turn on both your computer and the LCD Display. Contact a local LG Electronics Service Center to buy optional items. Connecting to Other devices · AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected to the LCD Display. For detailed information on connecting AV input devices, refer to the contents under Adjusting Your LCD Display. The LCD Display 's configuration at the back may vary slightly depending on the LCD Display model. · 19 Connections Connecting AV Devices 1. 3. Connect the Video and Audio R-AUDIO-L port of the DVD, VCR or DTV Set-Top Box to the Video and Audio [R-AUDIO-L] LCD Display. Play the DVD, VCR or Camcorder with a DVD disc or tape inserted. Select AV using the SOURCE button on the front of the LCD display or on the remote. Connecting using a Component Cable 1. Connect a set of audio cables between the [AV/COMPONENT AUDIO IN [L- AUDIO- R] on the LCD Display and the AUDIO OUT jacks on the DVD player or other external device. Connect the Component/ D-sub cable to the [RGB/COMPONENT IN] ports on the monitor. Note 2. Select Component using the SOURCE button on the front of the LCD Display or on the remote control. Then, start the DVD Player with a DVD disc inserted. 20 Connections For an explanation of Component video, consult your DVD or external device's user manual. Connecting to a Camcorder 1. Locate the AV output jacks on the camcorder. Unplug the video cable from the back of the computer. The figure shown below ("Check Signal Cable") appears on a black background when the LCD Display is working normally even though no video signal is detected: While in the Self-Test mode, the LED power indicator remains green and the figure moves around on the screen. 4. Turn off your LCD Display and reconnect the video cable; then turn on both your computer and the LCD Display If your LCD Display screen remains blank after using the previous procedure, check your video controller and computer system; your LCD Display is functioning properly. Warning Messages You can even view the screen at a resolution of 1920 x 1080. Before calling for assistance, check the information in this section to see if you can remedy any problems for yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer. For more network-related information, refer to the MagicInfo Troubleshooting section. · Problems related to the Installation Note Problems related to the LCD Display installation and their solutions are listed. 74 Troubleshooting A: Check if the signal cable between the computer and the LCD Display is securely connected. (Refer to Connecting a Computer) Q: A: Shadowiness on the fringe of the panel due to technical limitations. The slight shadowiness on the fringe of the panel is due to the inside sheet that is seen through the thin outer bezel, which is not a defect but a technical limitation for the panel in the slim bezel design. Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed. Q: A: The screen is blank and the power indicator is off. Ensure that the power cord is firmly connected and the LCD Display is on. (Refer to the Connecting a Computer) Q: A: "Check Signal Cable" message. [. . . ] Adjusts the Treble and Bass to the appropriate levels. 76 Troubleshooting Problems related to the Remote Control Note Problems related to the remote control and their solutions are listed. Q: A: A: A: A: A: The remote control buttons do not respond. Check the polarities (+/-) of the batteries. [. . . ]