User manual LG TBT5DNXRLG

[. . . ] y Any damages or injuries by using unapproved accessories are not covered by the warranty. NOTE y The accessories supplied with your product may vary depending on the model. y Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. y User should use shielded signal interface cables (D-SUB cable / DVI-D cable) with ferrite cores to maintain standard compliance for the product. 4 ASSEMBLING AND PREPARING Parts and buttons ENGLISH ENG Power Indicator y Lighting On: Turned on y Lighting Off: Turned off (Power Button) Button (See p. 13) Connection panel (See p. 10) ASSEMBLING AND PREPARING 5 Button MENU Accesses the main menus. (See p. 13) OSD LOCKED/ UNLOCKED Description ENG ENGLISH This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. [. . . ] y If you turn the Monitor set on while it is cold, the screen may flicker. y Some red, green, or blue spots may appear on the screen. This is normal. NOTE y "Self Image Setting" Function. This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. (Only supported in Analog Mode) y `AUTO' Function. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. (Only supported in Analog Mode) 12 CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS ENGLISH ENG Accessing The Main Menus 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 3 Change the value of the menu item by pressing the buttons on the front of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 4 Select EXIT to leave the OSD menu. Monitor set Buttons MENU (See p. 13) Sets the screen options. EXIT Exits the OSD menu. MODE (See p. 18) Sets the mode. AUTO (See p. 11) Optimizes the resolution. INPUT Sets the external input. NOTE Different menu items are enabled depending on the type of input signal. y D-SUB / DVI Mode: MENU, MODE, DUAL, AUTO, INPUT, EXIT y HDMI Mode: MENU, MODE, INPUT, EXIT CUSTOMIZING SETTINGS 13 Customizing Settings ENG ENGLISH Menu Settings 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. menu. 2 Press the MENU button to display the options in the OSD 3 Set the options by pressing the buttons on the front of the Monitor set. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. The available program settings are described below. Menu PICTURE Sub-menu BRIGHTNESS CONTRAST SHARPNESS BLACK LEVEL COLOR COLOR TEMP (PRESET/USER) GAMMA COLOR RESET DISPLAY HORIZONTAL VERTICAL CLOCK PHASE OVERSCAN VOLUME OTHERS LANGUAGE POWER INDICATOR WHITE BALANCE ORIGINAL RATIO SUPER ENERGY SAVING FACTORY RESET To customize the screen status for a user's operating environment To adjust the position of the screen To improve the clarity and stability of the screen To adjust the volume To customize the color of the screen Analog Digital HDMI Description To adjust the brightness, contrast and sharpness of the screen To set offset level y Analog: D-SUB(Analog signal) input. y HDMI: HDMI(Digital signal) input. 14 CUSTOMIZING SETTINGS PICTURE ENGLISH ENG 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. Resets the values of total energy consumption reduction and CO2 emission reduction estimates. ORIGINAL RATIO WIDE Restore all factory default settings except"LANGUAGE. " Press the immediately. NOTE y TOTAL POWER REDUCTION: How much power is saved while using the monitor. y TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2. y SAVING DATA(W/h) 545 mm (21. 5 inch) 584 mm (23 inch) SUPER SAVING LED SAVING 4 W/h 15 W/h 5 W/h 12 W/h y Saving Data depends on the Panel. So, those values should be different from each panel and panel vendor. y LG calculated these values by using "broadcast video signal". y LED Saving refers to how much power can be saved using a WLED Panel instead of CCFL panel. y SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING function. , buttons to reset 18 CUSTOMIZING SETTINGS MODE Setting ENGLISH ENG 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MODE button to display the options in the OSD menu. 3 Set the options by pressing the buttons on the front of the Monitor set. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. The available picture settings are described below. Menu USER MOVIE TEXT PHOTO sRGB Description It is a mode that the user can adjust each element. It can adjust the color mode of the Main Menu. [. . . ] See the 'Specifications' section of this manual and configure your display again. y This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. Do you see an "OUT OF RANGE" message on the screen? Do you see a "CHECK SIGNAL CABLE" message on the screen? Do you see a "OSD LOCKED" message on the screen?Do you see "OSD LOCKED" when you push MENU button? y You can secure the current control settings, so that they cannot be inadvertently changed. [. . . ]