User manual LG TBUH096TSG0.ANWBSAF

[. . . ] In case of non-Panasonic Tank Unit is being used with Panasonic Air-to-Water Heatpump System, Panasonic cannot guarantee neither good operation nor reliability of the system. ⷠThis manual describes how to operate the Heatpump system between indoor and outdoor units only. To prevent personal injury, injury to others, or property damage, please comply with the following. Incorrect operation due to failure to follow instructions below may cause harm or damage, the seriousness of which is classified as below: WARNING This sign warns of death or serious injury. [. . . ] Check the installation rack periodically to make sure that it is not damaged. After long periods of use, the strength of the installation rack may have deteriorated. CONTROL PANEL Do not let the control panel get wet. Otherwise, it may cause electric shock or fire. Do not press the buttons on the control panel with hard, pointed objects. Do not wash the control panel with water, benzene, thinner or scouring powder. Otherwise, it may cause injury if mishandling. Some functions described in this manual may not be applicable to your unit. ⷠConsult your nearest authorized dealer for further information. The current day and time need to be set when: - The power is turned on for the first time. - After a long time has elapsed since the power was last turned on. STATUS mode cannot be activated when the "SETTING" indicator is ON. Or wait 30 seconds to exit "SETTING" mode. "SETTING" mode cannot be activated when the "PUMPDW" and "STATUS" indicator is ON. 7 Timer Display Lights up if Timer operation is selected 6 different programs can be set in a day (1 ~ 6) Indicates the selected day Indicates the next timer operation day Time to be selected (10 minutes step) OFF Timer ON Timer To automatically switch "OFF" the unit To automatically switch "ON" the unit Day to be selected Function Enter timer mode Set day & time Step Press If you want to set the timer together with other operations, press The selected day will be highlighted with . ⷠAfter 2 seconds, the display will move to the next program. During timer setup, if no button is pressed within 30 seconds, or if the button is pressed the setting at that moment is confirmed and timer setup is ended. Until your desired day is shown, press to check the set programs. You can set the Timer for each day of the week (Monday to Sunday) with 6 programs per day. ⷠWhen the unit is switched on by the ON TIMER, it will use the previously set temperature to control the room temperature. You may also select collective days with same timer setting. ⷠPromotes energy saving by allowing you to set up to 6 programs in any given day. [. . . ] This maintenance should be carried out by authorized dealer. TURN OFF POWER SUPPLY then please consult authorized dealer under the following conditions: · Operation is delayed a few minutes after restart. Outdoor unit emits steam during heating mode. This is due to defrost operation happens at the heat exchanger. [. . . ]