User manual LG TCH-700

[. . . ] The use of unauthorized arts can cause malfunctions. Consult with your nearest car audio dealer if installation requires the drilling of holes or other modifications of the vehicle. Do not use the front panel as a way of gripping the unit during installation and wiring. [. . . ] The front panel may come away and the unit may drop on the floor. Mounting the unit When removing the unit from the installation sleeve If you need to remove the unit from the installation sleeve, proceed as follows. 1 Remove the rear supporter from the unit. 3 Insert the lever A into hole on one side of the unit, and pull the lever toward you. Do the same operation on the other side and pull out the unit from the installation sleeve. Dashboard Installation sleeve Bend the claws according to the thickness of the dashboard. 2 Installations 1 A 2 A Connections Main connector Connect the main connector to the female connector on the back of the unit. Memory Back-up Lead (Yellow) Connect the yellow memory power supply wire to a 12V + terminal that is always supplied with power regardless of the vehicleÕs ignition switch position. If this connection is made incorrectly or is not made at all, the unit will not work. Antenna Connection Insert the plug of the car antenna cable into the jack at the rear of the unit. Ground Connection(Black) Connect the ground lead (black) to a metal part of the vehicle and secure it using the screw provided on the vehicle for this purpose. If this connection is loose, or if the cord is connected to something other than a metal part of the car, noise or malfunction may result. Line Out Jacks(Optional) Connect to the Line-in RCA jacks of the power amplifier. Power Antenna Lead/External Amplifier Remote Turn-on Lead Your will find a separate lead, blue with a male terminal suitable to many automatic antenna. This lead is not to be used with nonautomatic antenna. If an automatic car antenna is used, when connecting the lead, the antenna will be automatically extened when the main switch is turned on. This can also be used as a remote turnon wire connection for amplifiers that have a remote sensing lead. Insert a cassette tape with the exposed tape side to the right. If radio broadcast is being received, cassette playback automatically begins. 3 The tape direction can be reversed by pressing both( ) buttons together. POWER DN MD/LD TUNE BAND UP 1 25WX2 2 5 3 6 4 4 exposed side 5 The tape direction automatically reverses when the tape end has been reached. To stop playback, press the EJECT ( ) button and remove the cassette tape. Radio Operation Basic Operation Turn the power ON. 2 Press the BAND button to select the desired frequency band. AUTO Tuning Press the TUNE / buttons for more than 1 seconds. MANUAL Tuning Press the TUNE / buttons repeatedly until the desired station appears. 4 Adjust the Volume and Tone using MD/LD and CONTROL button. 1 Memorizing Stations 24 stations [18FM, 6AM(MW)] can be preset using 1-6 PRESET(BEST STATION MEMORY) buttons. Stations often listened to can be quickly recalled. 1 Select the desired band using the BAND button. [. . . ] Stations often listened to can be quickly recalled. 1 Select the desired band using the BAND button. 2 Tune in the desired station using the TUNE / buttons. [. . . ]