User manual LG TCH-M1001

[. . . ] STEREO CD CAR RECEIVER OWNER'S MANUAL MODEL : TCH-M1000 / TCH-M1001 To fully enjoy the features and functions of this new unit, we recommend that you read this OWNER'S MANUAL carefully and completely. Internet address ; http://ua. lge. com Customer Information Center LG ; (380-44) 490-7777, 8-800-303-0000 Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION Use of controls or adjustments or performance of procedures other than those specified here in may result in hazardous radiation exposure. Laser component in this product is capable of emitting radiation exceeding the limit for Class 1. [. . . ] The mode indicator lights up in the following order. b Turn left or right CONTROL otes · When you turn off, the unit is memorized automatically the volume level currently before you turn off. Point the remote control unit at the sensor POWER ON and OFF Press POWER button for more than 2 seconds. MUTE FUNCTION Press POWER button briefly. Number # FUNCTION Enters the number input mode. Number 0 to 9 · Memorizes broadcast stations (1~6) · Selects preset number (1~6) · Direct track selection (0~9) (Example : track number 19) a press # button b press 1, 9 Presetting stations · AUTO Tuning Press the . m/M > buttons for more than 1seconds. m/M > buttons for more than 2 seconds and then buttons repeatedly until the desired station appears. CLK CD SKIP/SEARCH · CD SKIP Press the . m/M > buttons for more than 1seconds. · CD SEARCH(Only CD) Press and hold down the . m/M > buttons until the desired section appears. SOUND adjustments a press the SELECTION (SEL) button repeatedly to select the mode you want to adjust from volume, bass, treble, balance and fader. b Press and hold down the U or u button to adjust the sound quality Note: Without selecting any mode with SELECTION (SEL), only the volume level can be adjusted by pressing U or u DISP FUNCTION · Press CLK/DISP button once briefly to display the time. · Press CLK/DISP button twice briefly to display the ID3 Tag. 13 CD Basic Operation(CD/MP3 CD) Basic Playback a Insert a disc with the labeled side up to start playback. If a disc is already inserted, press FUNCTION (FUNC) to select the CD operation. Disc indicator lights up, and the track number and elapsed playing time are displayed. b Adjust the volume by turning CONTROL UP/DOWN dial. CD/MP3 CD playback button Eject a disc. The unit automatically switches to radio reception. The track number and elapsed playing time flash on and off. Press and hold down until the start of the desired passage, then release it. Press and hold down until the start of the desired passage, then release it. (Only CD) Skip to the next track with a short press (for less than 1seconds). Each extra press skips forward one extra track. [. . . ] a Press POWER button to turn on the power of the car stereo. b Slip a CDC in the magazine with the sticker upwards. c Insert the magazine in the CD changer. d Press FUNCTION button to activate the CDC function, one of the disc will be played automatically, If the CD changer is not connected, the CDC function is not activated. [. . . ]