User manual LG TS-200

[. . . ] DV4S2H-P. BUKRLLK_5947_ENG 11/20/08 4:22 PM Page 1 ENGLISH TS-200 As an ENERGY STAR® Partner, LG has determined that this product or product models meet the ENERGY STAR® guidelines for energy efficiency. Internet address ; http://ua. lge. com Customer Information Center LG ; (380-44) 490-7777, 8-800-303-0000 ENERGY STAR® is a U. S. : MFL58825947 DV4S2H-P. BUKRLLK_5947_ENG 11/20/08 4:22 PM Page 2 Safety Precaution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] (Skip) Returns to the beginning of current chapter or track or go to the previous chapter, track or File. h > (Skip) Go to next chapter, track or File. i Display window Shows the current status of the unit. j USB Port Connect an USB Flash Drive. Precautions in using the touch buttons · Use the touch pad with clean and dry hands. · Do not press the buttons on the touch pad with too much force. · Do not touch the button on the touch pad with any conductive material such as metalic object. It may cause a malfunction. 8 DV4S2H-P. BUKRLLK_5947_ENG 11/20/08 4:22 PM Page 9 Adjust the settings ON REMOTE 1 Display setup menu: 2 Select a desired option on the first level: 3 Move to second level: 4 Select a desired option on the second level: 5 Move to third level: 6 Change the setting: SETUP vV B vV B v V / ENTER Adjust the display settings TV Aspect ­ Select which screen aspect to use based on the shape of your TV screen. [4:3]: Select when a standard 4:3 TV is connected. [16:9]: Select when a 16:9 wide TV is connected. Display Mode ­ If you selected 4:3, you'll need to define how you would like widescreen programs and films to be displayed on your TV screen. [Letterbox]: This displays a widescreen picture with black bands at the top and bottom of the screen. [Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary. Adjust the audio settings Adjust the settings - more you can do When you turn on for the first time (optional) The menu for a language selection will appear when you turn on the unit for the first time. You must select a language to use the unit. Use vV b B to select a language then press ENTER and the confirm menu will appear. Use b B to select [Enter] then press ENTER. Dolby Digital / DTS / MPEG ­ Selects the type of digital audio signal when using the DIGITAL AUDIO OUT jack. [Bitstream]: Select this when you connect this unit's DIGITAL AUDIO OUT jack to an amplifier with a built-in Dolby Digital, DTS or MPEG decoder. [PCM] (for Dolby Digital / MPEG): Select this when you connect this unit's DIGITAL AUDIO OUT jack to an amplifier without a built-in Dolby Digital or MPEG decoder. [Off] (for DTS): Select this when you connect this unit's DIGITAL AUDIO OUT jack to an amplifier without a built-in DTS decoder. (Frequency) ­ Selects the sampling frequency of the audio signal. [48 KHz]: The audio signals are always converted to 48 kHz. [96 KHz]: The audio signals are output in their original format. DRC (Dynamic Range Control) ­ Make the sound clear when the volume is turned down (Dolby Digital only). [. . . ] Press CLEAR to exit. ON REMOTE 1 Connect an USB Flash Drive to the USB port on the unit: 2 Display the menu screen in stop mode: 3 Select a file: 4 Play the file: 5 Remove the USB Flash Drive: O RETURN PLAY Photo file requirement JPEG file compatibility with this unit is limited as follows: · File extensions: ". jpg" · Photo size: Less than 2MB recommended · CD-R/RW, DVD±R/RW Format: ISO 9660 · Maximum Files/Disc: Less than 600 (total number of files and folders) v V, DVD MENU N - Notes an USB Flash Drive · You can switch USB and DISC mode by pressing RETURN (O) only in stop mode. · Do not extract the USB device in operating. · Regular back up is recommended to prevent data loss. · If you use an USB extension cable or USB HUB, the USB device might not be recognized. [. . . ]