User manual LG UB1HBAS01P

[. . . ] ) Do not fasten the screws with too much force; otherwise they may be worn out and get loosened. Tidying cables Only 32/37/42LS57**, 65LM62**, 32/42/47LM669* 1 Gather and bind the cables with the Cable Holder. NOTE Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. Cable Holder Only 32/37/42/47/55LM62**, 32/42/47/55/60LM64**, 32/42/47/55LM660*, 42/47/55LM67**, 42/47/55LM76** 1 Gather and bind the cables with the Cable Management. [. . . ] Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11)" When applying the RF Isolator, a slight loss of signal sensitivity can occur. ASSEMBLING AND PREPARING 15 Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. These devices only work with certain models. ENGLiSh ENG P AG-F2**dp, AG-F3**dp Dual play glasses AG-F2**, AG-F3** Cinema 3D Glasses AN-MR300 Magic Remote Control AN-WF100 Wireless LAN 60LM645*, 32/42/47/55LM66**, 42/47/55LM67**, 42/47/55LM76** Compatibility AG-F2**dp, AG-F3**dp Dual play glasses AG-F2**, AG-F3** Cinema 3D Glasses AN-MR300 Magic Remote Control AN-WF100 Wireless LAN 32/37/42LS57** 32/37/42/47/55/65LM62**, 32/42/47/55/60LM64** (Except 60LM645*) · The model name or design may be changed depending on the upgrade of product functions, manufacturer's circumstances or policies. H OK S SETTINGS Accesses the main menu, or saves your input and exits the menus. INPUT /i 1 2 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. B type buttons are touch sensitive and can be operated through simple touch with your finger. NOTE y You can set the power indicator light to on or off by selecting OpTiON in the main menus. Y When transporting a large TV, there should be at least 2 people. Y When transporting the TV by hand, hold the TV as shown in the following illustration. ENGLiSh ENG CAUTiON y Avoid touching the screen at all times, as this may result in damage to the screen. ) ENGLiSh ENG Swivel 10 degrees to the left or right and adjust the angle of the TV to suit your view. (Only 32/37/42/47/55LM62**, 32/42/47/55/60LM64**, 32/42/47/55LM660*, 42/47/55LM67**, 42/47/55LM76**) 10 10 1 2 3 CAUTiON When adjusting the angle of the product, watch out for your fingers. » Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury. (Only 32/37/42/47/55LM62**, 32/42/47/55/60LM64**, 32/42/47/55LM660*, 42/47/55LM67**, 42/47/55LM76**) Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. - If there are bolts inserted at the eye-bolts position, remove the bolts first. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface. CAUTiON y Make sure that children do not climb on or hang on the TV. [. . . ] Y Optical Digital Audio Out is not available when connecting a headphone. ) IN/OUT AV1 (RGB) (*Not Provided) AUDIO / VIDEO English Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable as shown. To display images by using progressive scan, make sure to use the euro scart cable. [. . . ]