User manual LG UBVS5HNS01P

[. . . ] The product may fall and get damaged or injure your foot. 3 Connecting the Display Positioning your display After installation, adjust the angle as shown below. 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range Swivel Range : 355˚ Height Range : maximum 4. 33 inches (110. 0 mm) 110. 0 mm * Please be sure to remove the Locking pin to adjust the height. 4 Connecting the Display When adjusting the angle of the screen, do not put your finger(s) in between the head of the monitor and the stand body. You can hurt your finger(s). When adjusting the height of the screen, do not put your finger(s) in between the head of the monitor and the stand base. You can hurt your finger(s). WARNING You do not need to replace the Locking pin after it is removed, to adjust its height. ERGONOMIC It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees. 5 Connecting the Display Using the Pivot function -The pivot function allows you to rotate the screen 90 degrees clockwise. 1. [. . . ] A Connect DVI-D(Digital signal) Cable B Connect D-sub(Analog signal) Cable C Connect Audio Cable 2 in order, then tighten the screw D Connect DisplayPort Cable (Separate purchase) NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. When using a D-Sub signal input cable connector for Macintosh Mac adapter : For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. Varies according to model. Wall-outlet type Connect the signal input cable and tighten it up by turning in the direction of the arrow as shown in the figure. DVI-D (This feature is not available in all countries. ) Warning Please pull the DVI cable first, then pull DisplayPort cable, for protect your finger. 7 Connecting the Display 3. Put the power cord and cables into the cable holder. Cable Holder 4. Press the power button on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. (Only Analog Mode) Power Button NOTE ‘ Self Image Setting Function’?This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. 8 Connecting the Display Connecting the USB(Universal Serial Bus) Cable 1. You can use the USB port at the back of the monitor to connect peripherals (USB mouse, USB keyboard, etc. ) to the monitor, not to the computer. Two USB Downstream ports Connect these ports to a mouse, USB keyboard, memory stick with current spec under 100mA. One USB Upstream port Connect this port to the downstream port of a computer, laptop or USB monitor (Your computer or USB monitor must support USB and have USB ports). 2. The monitor’s USB terminal supports USB 2. 0 and High Speed cables. NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. 9 Control Panel Functions Front Panel Controls MENU Button OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. As the criteria for video signal, it is the darkest screen the monitor can show. To choose the language in which the control names are displayed. Restore all factory default settings except "LANGUAGE. " Press the , buttons to reset immediately. Exit : Exit , , : Move : Select another sub-menu 16 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the SUPER ENERGY SAVING Button, then the main menu of the OSD appears. Menu Name Sub-menus Icons Button Tip Exit Move Restart to select sub-menu NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. 17 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu ON Description Turn on the SUPER ENERGY SAVING fuction. When current setting value is ON, the SUPER SAVING color is green. OFF Turn off the SUPER ENERGY SAVING function. Now the monitor is LED SAVING function. When current setting value is OFF, the SUPER SAVING color is gray. RESET Clear the TOTAL POWER REDUCTION and TOTAL CO2 REDUCTION values. Exit : Exit , : Move : Select another sub-menu OK : Select TOTAL POWER REDUCTION : How much power is saved during using the monitor. TOTAL CO2 REDUCTION : Change the TOTAL POWER REDUCTION to CO2. 18 On Screen Display(OSD) Selection and Adjustment NOTE SAVING DATA(W/h): 24 inch SUPER SAVING LED SAVING 5 17 Saving Data depends on the Panel. So, those values should be different from each panel and panel vendor. LG accumulate those values using integrated function with 10 minutes broadcast video signal. LED Saving means that how much power can be saved using WLED Panel instead of CCFL panel. SUPER Saving means that how much power can be more saved using SUPER ENERGY SAVING function. 19 Troubleshooting Check the following before calling for service. No image appears G Is the power cord of the • Check and see if the power cord is connected properly to the power outlet. • Press the Power button. • If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. • Try to turn on the PC. G Do you see an "OUT OF • This message appears when the signal from the PC (video card) is out of horizontal or vertical RANGE" message on frequency range of the display. [. . . ] You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD UNLOCKED” will appear. 20 Troubleshooting Display image is incorrect G Display Position is incorrect. Digital UBVS5HNS01P Sync Input Video Input Signal Input Input Form 15 pin D-Sub Connector DVI-D Connector (Digital) RGB Analog (0. 7 Vp-p/ 75 ohm), Digital VESA 1920 x 1080 @60 Hz VESA 1920x 1080 @60 Hz Resolution Plug&Play USB Power Consumption Dimensions & Weight Max Recommend DDC 2B(Digital), DDC2AB(Anlaog) USB2. 0 On Mode Sleep Mode Off Mode : 22 W(Typ. ) ≤ 0. 3 W ≤ 0. 3 W Without Stand With Stand Width 56. 91 cm ( 22. 40 inch) Width 56. 91 cm ( 22. 40 inch) Height 34. 19 cm ( 13. 46 inch) Height 43. 26 cm ( 17. 03 inch)(Min. ) 54. 26 cm ( 21. 36 inch)(Max. ) Depth 6. 30 cm ( 2. 48 inch) Depth 27. 11 cm ( 10. 67 inch) Weight(excl. packing) 4. 8 kg (10. 56 lb) Tilt Swivel Height -5˚ to 15˚ 355˚ 110 mm / 4. 33 inch Range Power Input Environment al Conditions AC 100 - 240 V~ 50 / 60 Hz 1. 2 A Operating Conditions Temperature 10 ˚C to 35 ˚C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 ˚C to 60 ˚C Humidity 5 % to 90 % non-Condensing Stand Base Power cord Attached ( ), Detached ( O ) Wall-outlet type NOTE Information in this document is subject to change without notice. 23 Specifications Preset Modes (Resolution) UBVS5HNS01P Display Modes (Resolution) Horizontal Freq. (Hz) 1 2 3 4 5 6 7 8 9 10 11 *12 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 1680 x 1050 1920 x 1080 31. 468 31. 469 37. 500 37. 879 46. 875 48. 363 60. 023 67. 500 63. 981 79. 976 65. 290 67. 500 70 60 75 60 75 60 75 75 60 75 60 60 *Recommend Mode Indicator MODE LED Color On Mode Sleep Mode Off Mode White White Blinking Off 24 Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate or the interchange device. 1. [. . . ]