User manual LG UU48AC UHA

[. . . ] In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs. expose you to very high voltage and other hazards. If the set does not operate properly, unplug it and call your dealer. Aerial Press the POWER button on the front panel or side panel to turn off the TV when the TV set is not being used for a long time. It is recommended to remove the plug from the wall outlet(Power point). Connect the aerial cable to the socket on the back cover. For the best reception an outdoor aerial should be used. Location Disconnecting device from mains Warning Mains plug is the disconnecting device. [. . . ] Repeatedly press the MENU button to return to normal TV viewing. * Degaussing (option) Due to the super large Tube in the set. The colour purity of the picture may be affected by other magnetic influences such as speakers. Stripes may appear on the screen or there may be colour patches. Note : If you cannot adjust the screen condition by degaussing, try it again after about 4 minutes. TV and AV modes AV mode is used when a video cassette recorder (VCR), or other equipment is connected to the set. Note : When a VCR is connected via the aerial socket the set is used in TV mode. See the `Connection of external equipment' section. AV1 : VCR connected to the Euro scart socket or AV IN 1 sockets on the set AV2 : VCR connected to the AV IN 2 sockets on the set. COMPONENT : DVD Player connected to the COMPONENT sockets on the set (option) Alternatively you can select the TV or AV mode by pressing the TV/AV button. In AV mode, to return to TV mode, press the D / E or NUMBER buttons. Sleep timer You don't have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time elapses. Repeatedly press the SLEEP button to select the number of minutes. Select a programme to be deleted with the D / E or F / G button. The selected programme is deleted, and all the following programmes are shifted up one position. Select a programme to be copied with the D / E or F / G button. All the following programmes are shifted down one position. Select a programme to be moved with the D / E or F / G button. Move the programme to the desired programme number with the D / E or F / G button. Press the YELLOW button again to release this function. Select a programme number to be skipped with the D / E or F / G button. Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu. [. . . ] UPDATE Displays the TV picture on the screen while waiting for the new teletext page. The display will appear at the top left hand corner of the screen. When the updated page is available then the display will change to the page number. Press this button to view the updated teletext page. [. . . ]