User manual LG V-C7050NTB

[. . . ] Doing so could result in death, fire or electrical shock. Do not continue to vacuum if any parts appear missing or damaged. The fumes from these substances can create a fire hazard or explosion. Doing so could result in death or personal injury. [. . . ] Turn off all controls before unplugging. If plug does not fit, contact a qualified electrician to install the proper outlet. Doing so could result in product damage or electrical shock. Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts. Improper repairs may lead to serious hazards for the user. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not plug in if control knob is not in OFF position. Keep children away and beware of obstructions when rewinding the cord to prevent personal injury Do not allow to be used as toy. Close attention is necessary when used by or near children. Do not use it if it is damaged, cut or punctured. Failure to do so could result in death, or electrical shock. How to use Assembling vacuum cleaner äÍ ÔÓθÁÓ, Ú¸Òfl ë· Push the nozzle into the telescopic pipe. Push telescopic pipe firmly into hose handle. Push the fitting pipe on the flexible hose into the attachment point on the vacuum cleaner. To remove the flexible hose from the vacuum cleaner, press the button situated on the fitting pipe, then pull the fitting pipe out of the vacuum cleaner. How to use Operating vacuum cleaner äÍ ÔÓθÁÓ, Ú¸Òfl ùÍÒÔÎÛÚ^Ëfl Ô°ÎÂÒÓÒ Pull out the power cord to the desired length and plug into the socket. Press the cord reel button to rewind the power cord after use. To store during vacuuming, for example to move a small piece of furniture or a rug, use park mode to support the flexible hose and nozzle. When you have switched off and unplugged the vacuum cleaner, press the cord reel button to automatically rewind the cord. You can store your vacuum cleaner in a vertical position by sliding the hook on the nozzle into the slot on the underside of the vacuum cleaner. How to use Using carpet and floor nozzle äÍ ÔÓθÁÓ, Ú¸Òfl àÒÔÓθÁÓ, ÌË ÌÒÍË Îfl ~ËÒÚÍË ÔÓÎ Ë ÍÓ, Ó, The 2 position nozzle This is equipped with a pedal which allows you to alter its position according to the type of floor to be cleaned. Hard floor position (tiles, parquets floor) Both pedal position are suitable. [. . . ] If suction power decreases after cleaning dust tank, clean air filter and motor safety filter. How to use Cleaning air filter and motor safety filter äÍ ÔÓθÁÓ, Ú¸Òfl If suction power is decreased after cleaning dust tank, clean air filter and motor safety filter. Air filter and motor safety filter are located at the center of vacuum cleaner in the above figure. Open the air filter cover by pulling the air filter cover lever and take out air filter. [. . . ]