User manual LG V-CQ463ND

[. . . ] €¢ Because these following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described in this manual. CAUTION/WARNING SYMBOLS USED Indicates that a danger of death or serious injury exists. WARNING WARNING CAUTION Indicates that a risk of personal injury or material damage exists. OTHER SYMBOLS USED Explains terms to help users understand how use the product properly. [. . . ] Check the charge status of the robotic vacuum cleaner. - When charging starts, the battery level indicator and “ ” will be displayed in sequence in the display panel. - When charging is complete, the battery level indicator and “FULL” will be displayed in the display panel. Flash ■ Power Lamp Charging Lamp Charging <Charge display> Fully charged When the battery level display flashes while cleaning, the robotic vacuum cleaner stops vacuuming and automatically charges itself at the charger. Charge complete Charging Required charging ■ Flash When the battery level flashes and “LO” is displayed while cleaning, robotic vacuum cleaner cannot be operated by the buttons on the main unit. In this case, directly carry the robotic vacuum cleaner to the charger to charge the battery. (This is when the battery is completely discharged. ) NOTE ● When the product is initially purchased, it will take about 120 minutes to fully charge the battery and will run for about 90 minutes. — When charging the battery while the battery is over-heated, the charging time can increase. — Measures to take when charging is not smooth. When the robotic vacuum cleaner cannot be automatically charged, check the following: - Turn the Power Switch at the bottom of the robotic vacuum cleaner off and on (Reset). œ½ An increased charging time and a shorter battery life indicates the near end of the battery life. Please contact an authorized customer care center to replace your battery. The rechargeable battery incorporated in this product is not user replaceable. For information on its replacement, please contact your service provider. 12 11:24:11 AM Operating the cleaner USING THE ROBOTIC VACUUM CLEANER STARTING/STOPPING CLEANING You can run or stop all robotic vacuum functions. –  Each robotic vacuum function only runs when the Power Switch is turned on. When the robotic vacuum is operating, press the ( ) button to cancel the operation and select a function. 03 OPERATING THE CLEANER ■ Turning the power on or off Turning the power on - Main unit: Press the ( ) button. - The main unit buttons, battery level indicator and cleaning mode icons are turned on. Turning the power off - Main unit: Press and hold the ( ) button down for 3 seconds. - All icons except for the battery level indicator are turned off. [. . . ] €¢ A foreign substance (string, paper, toy etc. €¢ A foreign substance (dust, and remove the foreign substance from the left driving wheel. €¢ Turn off the Power Switch at the bottom and remove the foreign substance from the right driving wheel. • Slightly pull the stuck bumper outward. [. . . ]