User manual LG V-CR323NTU

[. . . ] To unplug, grasp the plug, not the cord. · Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts. Failure to do so could result in electrical shock or personal injury. -4- WARNING · Do not continue to vacuum if any parts appear missing or damaged. Personal injury or product damage could result. In these cases, contact LG Electronics Service Agent to avoid hazard. · Repairs to electrical appliances may only be performed by qualified service engineers. Improper repairs may lead to serious hazards for the user. · Do not use an extension cord with this vacuum cleaner Fire hazard or product damage could result. · Do not plug in if control knob is not in OFF position. Personal injury or product damage could result. (Depending on model) · Using proper voltage. Using improper voltage may result in damage to the motor and possible injury to the user. Proper voltage is listed onthe bottom of vacuum cleaner. · Keep children away and beware of obstructions when rewinding the cord to prevent personal injury. The cord moves rapidly when rewinding. [. . . ] These products clog the filters, reduce airflow and can cause damage to the cleaner. Failure to clean the dust bin could cause permanent damage to the cleaner. (Depending on model) · Don 't grasp the tank handle when you are moving the vacuum cleaner. The vacuum cleaner s body may fall when separating tank and body. Personal injury or product damage could result. You should grasp the carrier handle when you aremoving the vacuum cleaner. (Depending on model) · If after emptying the dust tank the indicator light is on(red), clean the dust tank. Failure to do so could result in product damage. (Depending on model) -6- IMPORTANT SAFETY INSTRUCTIONS CAUTION Thermal protector : This vacuum cleaner has a special thermostat that protects the vacuum cleaner in case of motor overheating. If the vacuum cleaner suddenly shuts off, turn off the switch and unplug the vacuum cleaner. Check the vacuum cleaner for possible source of overheating such as a full dust tank, a blocked hose or clogged filter. If these conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum cleaner. After the 30 minute period, plug the vacuum cleaner back in and turn on the switch. -7- E How to Use Connecting the flexible hose At first, push the dust cover (37) upwards, the dust cover fixes. Then push the end of the head (1) on the flexible hose (2) into the attachment point on the vacuum cleaner. To remove the flexible hose from the vacuum cleaner, press on the button (3) situated on the head, then pull upwards. (depending on model) · Plastic or metal tube (4). - Fit together the two tubes by twisting slightly. · Telescopic tube (5) - Push spring latch (6) forward. · Elbow tube (29) The elbow tube is for uses such as cleaning under the sofa, table and bed easily. - Fit the elbow tube onto the end of the telescopic tube and the grip handle. - If you pull the latch (30), the elbow tube can be bent. [. . . ] After changing or cleaning the filter, put the filter back. Replace the Exhaust Filter Cover (38) until the button locks the cover. The foam filter should be cleaned regularly by tapping it to remove the dirt. The electrostatic filter should be changed regularly. [. . . ]