User manual LG V281

[. . . ] DVD PLAYER/ VIDEO CASSETTE RECORDER OWNER'S MANUAL MODEL : V281 Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: The apparatus shall not be exposed to water, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. [. . . ] Tapes can be paused for up to 5 minutes. After 5 minutes your DVD+VCR will stop the tape to prevent damaging the tape or your DVD+VCR . Still picture quality can be improved slightly by using v or V. Double speed playback Press the "N" button during normal playback. The tape will play back at double speed and without sound. Press the "N" button to return to playback at normal speed Picture search: During playing back press either BACKWARD or FORWARD to this will enable you to rapidly wind the tape see where you are on the tape. Logic search: During fast forwarding or rewinding press and hold m or M the picture will be played back at 7 times normal playback speed. 4. Press 3 or 4 repeatedly to select: OFF, SOFT or SHARP. Please note you may only set OPR when playing a tape. Press i return to screen. PSET R Pr-12 ACMS OFF 12 SOFT SYS SET SHARP R f OSD ON OFF 20 Operation with tape Instant Timer Recording (ITR) Your DVD+VCR allows you to make recordings using a variety of simple methods: Instant Timer Recording (ITR) start recording immediately for a set period of time or until the video cassette runs out. Your DVD+VCR incorporates Long Play (LP) which enables you to record up to twice the amount of time on a video cassette. For example an E-180 will record up to 180 minutes using Standard Play (SP); using LP you will be able to record up to 360 minutes. Please note there will be a slight loss in picture and sound quality when using LP. Make sure that you have correctly connected your DVD+VCR as described earlier in this book. Insert a video cassette with protection tab into your DVD+VCR. The video cassette should have the window side facing up and the arrow facing away from you. Press 3 or 4 to select the programme number you wish to record. You may also directly select programme number using the numbered buttons on the remote control. If you wish to record directly from the AUDIO L/R (VCR IN AV1)/ VIDEO (VCR IN AV1) or AUDIO IN (L(MONO)/R)/ VIDEO IN terminals repeatedly press AV until the socket you wish to record from is displayed. AV 1 for recording from AUDIO L/R (VCR IN AV1)/ VIDEO (VCR IN AV1) terminals on the rear of your unit. AV 2 for recording from AUDIO IN (L(MONO)/R)/ VIDEO IN terminals on the front of your unit. Press LP if you wish to record in Long Play or Standard Play. [. . . ] Correction Insert a disc. The TV is not set to receive this unit's signal output. The video cable is not connected securely. The Progressive Scan is set to "On" on the setup menu but is connected to a standard (analog) television. Select the appropriate video input mode on the TV so the picture from the this unit appears on the TV screen. Connect the video cable into the jacks securely. [. . . ]