User manual LG VR4107C

[. . . ] Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. [. . . ] 1. Connect the HDMI OUT TO TV jack on the back of the unit to ARC jack on the TV using an HDMI cable (Type A, High speed HDMI™ cable with Ethernet). Some functions of this unit are controlled by the TV’s remote control when this unit and LG TV’s with SIMPLINK are connected through HDMI connection. Controllable functions by LG TV’s remote control : Power on/off, volume up/down, etc. Refer to the TV owner’s manual for the details of SIMPLINK function. LG TV’s with SIMPLINK function has the logo as shown above. Depending on the state of the unit, some SIMPLINK operation may differ from your purpose or not work. 2 Connecting Note , , HDMI cable 2. Turn TV and the unit on. ARC function is selected automatically. VR4107C-NU_DDEULLK_ENG. indd 11 2012-05-14 11:37:06 12 Connecting ARC (Audio Return Channel) function The ARC function enables an HDMI capable TV to send the audio stream to HDMI OUT TO TV of the unit. To use this function : -- Your TV must support the HDMI-CEC and ARC function and the HDMI-CEC and ARC must be set to On. -- The setting method of HDMI-CEC and ARC may differ depending on the TV. For details about ARC function, refer to your TV manual. -- You must use the HDMI cable (Type A, High Speed HDMI™ cable with Ethernet). -- You must connect the HDMI OUT TO TV on the unit with HDMI IN of the TV that supports ARC function using an HDMI cable. 1. Choose a different function/mode or press Z twice in a row. Remove the USB device from the unit. yy The file name is limited to 255 characters. yy Using NTFS file system is not supported. (Only FAT(16/32) file system is supported. ) yy Depending on the size and the number of the files, it may take several minutes to read the contents on the media. yy Devices which require additional program installation connected to a computer, are not supported. yy Do not extract the USB device while in operation. yy For a large capacity USB, it may take longer than a few minutes to be searched. yy To prevent data loss, back up all data. yy If you use a USB extension cable or USB hub, the USB device is not recognized. yy This unit is not supported when the total number of files is 1000 or more. yy External HDD, Card readers, Locked devices, or hard type USB devices are not supported. [. . . ] 1. While holding down 1 (TV POWER) button, and press the manufacturer code for your TV with the numerical buttons (see the table below). Manufacturer LG Zenith Code Number 1(Default), 2 1, 3, 4 1, 2 6, 7 8, 9 4 VOL + AV/INPUT VOL - PR/CH PR/CH Button MUTE@ AV/INPUT 1 (TV POWER) VOL +/– PR/CH W/S Operation Turn the TV’s volume on or off. Switch the TV’s input source between the TV and other input sources. Scan up or down through memorized channels. GoldStar Samsung Sony Hitachi 3 Operating 2. Release the 1 (TV POWER) button to complete setting. [. . . ]