User manual LG VRC 223 Y

[. . . ] Never spill any kind of liquid into the unit. Should this happen, unplug or main switch off the unit and contact an authorized service center. Do not insert anything between the air outlet blades because the inner fan may be damaged and could cause injury. Do not place any obstacles in front of the unit. [. . . ] Example: Unit itself White background. Example: E-6 Inserting the Remote Control Batteries You must insert or replace the remote control batteries when: You purchase the air conditioner The remote control does not work correctly Use two AAA, LR03 . 5V batteries. Do not use old batteries or different kinds of batteries together. Batteries may be completely discharged after months, even if they have not actually been used. Push the battery cover on the rear of the remote control with your thumb in the direction of the arrow and remove it. Insert the two batteries, taking care to respect the polarities: + on the battery with + on the remote control - on the battery with - on the remote control Close the cover by sliding it back unitl it clicks into place. Result: You can control all the functions your air conditioning unit directly from your seat, using the remote control. 3 E-7 Cooling Your Room You must select the Cool mode if you wish to lower the temperature in your room. You can also set the fan speed. If necessary, press the Result: (On/Off) button. Remote Control Control Panel The air conditioner starts up in the Cool mode. The unit beeps twice. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped It will start up to cool aotomatically after about three minutes. If the COOL indicator is not lit up on the unit: Press the or Press the button on the unit one or more times until the COOL / button. indicator lights up The unit beeps each time you press the Result: The air conditioner starts up in Cool mode. button on the remote control 3 To adjust the temperature, press the To adjust the temperature, press the or or button on the remote button on the unit one control one or more times until the required temperature is displayed. or more times until the required temperature is displayed. Possible temperatures are between 8°C and 30°C inclusive. on the unit one or more times until E-3 Selecting Good Morning Mode The Good Morning mode can be used when you are cooling your room to switch the air conditioner off automatically after 8 hours. Remote Control Control Panel The Good Morning function can be set whether the air conditioner is switched on or off, and this function can be selected for any mode. Press the or Press the Result: button on the remote control button on the unit . Each time you press a butoon, the unit beeps. The indicator and " " will be displayed. The remaining time is displayed and decreased by hour automatically to indicate the remaining time. If Good Morning is selected after switching on the unit , the air conditioner will run in Cool mode. During this period, the temperature displayed is one you set for the Cool mode. If the Good Morning is selected before switch on the unit, the air conditioner starts running in Cool mode and the temperature is set to 6 °C. The fan is running in low mode, and you can adjust the speed. To Cancel the Good Morning Timer If you no longer wish to use the Good Morning mode that you have set, you can cancel it at any time. Press the or press the button on the remote control. button on the unit to switch off the air conditioner. To cancel a selected Good Morning mode, you can also press the , , , or button on the remote control or press the , , or button on the unit. Result: The unit beeps. The air conditioner operates in the mode selected last. If you select the Energy Saving mode in the Good Morning mode, the Good Morning mode will be canceled and the air conditioner will start up in the Energy Saving mode. E-4 Selecting Energy Saving Mode If you wish to save Energy when using your air conditioner, select the Energy Saving mode with the Energy Saver button. To select the Energy Saving mode, press the Energy Saver button on the remote control or unit one or more times until the Energy Saver indicator lights up. Result: The fan and compressor cycle on and off together. The fan will continue to run for a short time after the compressor cycles off. Remote Control Control Panel To stop the Energy Saving mode, press the Energy Saver button on the remote control or unit again. [. . . ] The air conditioner does not operate with the remote control Check that there are no obstacles between you and the unit. Replace the remote control batteries if necessary. Check that you are close enough to the unit (seven metres/yards or less). No beep is heard when you press (On/Off) on the remote control Check that you are pointing the remote control at the remote control sensor on the unit. [. . . ]