User manual LG VRC420

[. . . ] Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] Higher rated scenes are not played unless an alternate scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc. to confirm your 4 Press SELECT/ENTERSETUP to exit therating selection, then press menu. Area Code DVD Enter the code of the country/area whose standards were used to rate the DVD video disc, based on the list in the reference chapter. 1 Select "Area Code" on the LOCK menu then press . 3 Select the first character using / buttons. cursor using and select 4 Shift thecharacter using button buttons. the second / 5 To complete the area code selection, press SELECT/ENTER. 17 PREPARATION 1 Select Password on the LOCK menu then press . "Change" or "New" is highlighted. 3 Enter the new 4-digit code, then press SELECT/ENTER. 4 Press SETUP to exit the menu. Before Operation OTHERS OTHERS PBC DivX(R) Registration On Select Operation with DVD and Video CD Playing a DVD and Video CD Playback Setup DVD VCD · Turn on the TV and select the video input source connected to the unit. Some features may also be available on the Setup menu. Slow Motion DVD VCD Moving to another TITLE DVD DivX When a disc has more than one title, you can move to another title. Press DISPLAY while playback is stopped then the appropriate number (0-9) or use / to move to another title. You can play any title by inputting its number while playback is stopped. ote Slow motion playback in reverse is not applicable for Video CD. Repeat DVD VCD DivX Moving to another CHAPTER/TRACK DVD VCD DivX You can play a title/chapter/all/track on a disc. Press REPEAT during playback to select a desired repeat mode. DVD Video Discs - Repeat Chapter/Title/Off · Chapter: repeats the current chapter. · Title: repeats the current title. · Off : does not play repeatedly. DivX/ Video CDs - Repeat Track/All/Off · Track : repeats the current track · All : repeats all the tracks on a disc. · Off : does not play repeatedly. ote ­ On a Video CD with PBC, you must set PBC to Off on the setup menu to use the repeat function (See "PBC" on page 18). When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as follows: · Press . or > briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. [. . . ] The remote control does not work properly. · The remote control is not pointed at the remote sensor of the unit. · The remote control is too far from the unit. · There is an obstacle in the path of the remote control and the unit. [. . . ]