User manual LG VUP555NB

[. . . ] When filter is washed, make sure not to wash green side of filter. The exhaust filter should be cleaned at least once a year. exhaust filter cover assembling · Fit exhaust filter cover lugs to the grooves of vacuum cleaner body Steam safety button shall be held when using steam vacuum cleaning. The terminals of both the drawtube 2 and the steam brush head 3 shall be aimed and completely assembled until the clicking sound; otherwise it may incur the brush head coming off or discontinuity of steam. [. . . ] Caution of burn when the duster board may still be hot. Fill 250ml water into the steam brush head with the measuring cup and then fasten the cover (Please refer to Page 38 for the detailed instruction). The time to moisten the duster may differ as for different usage or duration of the steam brush head Aim the suction nozzle at the duster board, and then press down the brush head until the clicking sound. As long as the duster is properly stuck on the duster board, the board could be connected with the suction nozzle of the steam brush head. The brush head The duster board Floor / ordinary ground cleaning Stick the duster on the duster board, and then connect with the steam brush head. Missing of duster may cause discoloration or distortion of the floors due to high temperature of the steam brush head. So, the duster shall be properly stuck before use. Switch on the steam brush head and start cleaning after steaming. The duster board shall be taken off from the steam brush head when cleaning the carpets or sofa; if not, the surfaces of carpets or sofa may be damaged or the duster may not be properly stuck on the board. Switch on the steam brush head and start cleaning after steaming. Stick the duster on the duster board, and then connect with the steam brush head; Repeat cleaning if it is impossible to clean up the stains once, but the use of steam brush head on the same position for a long period may damage the floors. Phase I Check whether the indicator of "Water-filling" flashes; if so, it is necessary to fill water into the steam brush head with the measuring cup. If so, please fill water into the steam brush head with the measuring cup. Check whether the steam safety button is held when using steam cleaning. On the account of safety, the steam brush head shall automatically power off when the steam safety button is not held for more than 30 seconds. * On the account of safety, this product is designed with a steam safety button. When holding the hose handle, it is easy to hold the steam safety button; if not, the steam brush head shall automatically power off. Re-press the steam button and hold the steam safety button in 30 seconds to restart the steam brush head. When the steam brush head automatically powers off, When using steam cleaning, the steam safety button shall be held. * On the account of safety, the steam brush head shall automatically power off when the steam safety button is not held for more than 30 seconds. If you doubt the product meets with malfunction, please check the cause of such malfunction before contacting with the after-sales service center or agent, so as to ensure efficiency of repair. Insert the plug tight (This product is applicable for 220V) Verify the power of socket is on Insert the hose tight Restart in 2 hours When the vacuum cleaner's suction is too large or the motor is under high speed running, they do not belong to the abnormal conditions. [. . . ] The big brush head shall be used for cleaning the carpet. As cleaning the carpet, sometimes, the machine may not work due to affection from the carpet materials. So, please carry out the operation as required Please confirm whether obstruction exists at the dust collector and suction inlet. the amplitude of vibration may be reduced due to the decrease of suction. [. . . ]