User manual LG W1952TQ-PF.ARUQAPN

[. . . ] No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of LG NANAO CORPORATION. LG NANAO CORPORATION is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to LG NANAO CORPORATION's receipt of said information. Although every effort has been made to ensure that this manual provides up-to-date information, please note that LG monitor specifications are subject to change without notice. ENERGY STAR is a U. S. Apple and Macintosh are registered trademarks of Apple Computer, Inc. [. . . ] (3) Flickering, screen position, and screen size are corrected by the autoadjustment function. · This function works correctly when an image is fully displayed over the Windows or Macintosh display area. It does not work properly when an image is displayed only on a part of the screen (DOS prompt window, for example) or when a black background (wallpaper, etc. ) is in use. · This function does not work correctly with some graphics boards. · "Auto in Progress" appears on the screen during auto adjustment. If satisfactory adjustment cannot be obtained with the autoadjustment function, perform the adjustment following the procedure below. When the screen is displayed correctly, go to step 4 "Range Adjustment". Advanced Adjustment NOTE 2 Run the Screen Adjustment Program. Load the LG LCD Utility Disk on the PC, and start the Screen Adjustment Program compatible with the PC in use. After the program starts up, perform the adjustment in step 3 following the instructions of the program. · For how to start the Screen Adjustment Program, refer to "readme. txt" or the "Readme" file. When you are using a Windows PC, you can run the program directly from the start menu of the disk. · If no adjustment program is available for your PC, display a checkerboard pattern on the screen (see below) and go to the following steps. Chapter 2 Settings and Adjustments 11 3 NOTE Perform advanced adjustments for the following using the <Screen> menu of the Adjustment menu. To eliminate vertical bars [Clock] (1) Choose <Clock> from the <Screen> menu, and press or , and press . · When <Gain> is set, color temperature setting is disabled, and is set to "OFF". Gain To adjust red, green, and 0 to 100% blue to a desired color tone Adjust the respective brightness of respectively red/green/blue to make a desired color tone. Display an image with white or gray background for adjustment. NOTE · Values shown in percentage are available only as reference. · The <Temperature> setting invalidates this setting. The <Gain> setting varies with color temperature. Reset To reset the color settings of the selected FineContrast mode to the default settings. To set/adjust color (1) Choose <Color> from the Adjustment menu, and press . (2) Select a desired function from the <Color> menu, and press The selected function menu appears. . (3) Adjust the selected item with The adjustment is completed. or , and press . *1 :Speaker applied model *2 :Speaker non-applied model Chapter 2 Settings and Adjustments 15 2-4 Off Timer Settings Attention To set monitor power-off time [Off Timer] This function allows the monitor to automatically turn off after a specified time has passed. This function serves to reduce afterimages caused when the monitor screen is left on for a long time period without use. Use this function when an image is displayed throughout the day. [Off Timer System] Timer ON time (1H - 23H) "ON time" expired *1 · The Off Timer functions even in the power saving mode, but the advance notice is disabled. The monitor power is turned off without advance notice. Monitor Operating Power Off Power Indicator Blue Flashing blue Off Last 15 min. [. . . ] * * * * Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. [. . . ]