User manual LG WD-12336ADK

[. . . ] These programs reduce skin irritation in children by minimising detergent residue. In addition, these programs classify laundry into various types and the wash is performed according to the laundry characteristics so that children feel refreshingly clean whenever they put on their clothes. · Child Lock The Child Lock function ensures that curious little hands are kept out of your washing machine. This safety feature stops your children from playing with the operation of the washing machine, and alerts you when it is activated. · Delay End Delay a cycle for up to 19 hours in one-hour increments and increase the convenience of using your washing machine especially when you have to go out. · 15' Quick Wash No time to lose!15 minutes wash will give you time to run out before it's too late. [. . . ] · Turn the 4 nuts clockwise to secure the legs to the machine. If the machine is not leveled or any of the leg is not secured firmly, the machine may lose balance due to severe vibration during the dehydrating process. 16_ setting up your washing machine WF0602NX-02847B_EN. indd 16 2010-04-29 ¿ÀÈÄ 6:09:29 STEP 4 Connecting the water and drain Connecting the water supply hose 1. Take the L-shaped arm fitting for the cold water supply hose and connect it to the cold water supply intake on the back of the machine. The water supply hose must be connected to the washing machine at one end and to the water tap at the other. If the hose is too short, replace the hose with a longer, high pressure hose. Connect the other end of the cold water supply hose to your sink's cold water tap and tighten it by hand. If necessary, you can reposition the water supply hose at the washing machine end by loosening the fitting, rotating the hose, and retightening the fitting. For selected models with an additional hot water intake: 1. Take the red L-shaped arm fitting for the hot water supply hose and connect it to the hot water supply intake on the back of the machine. Connect the other end of the hot water supply hose to your sink's hot water tap and tighten it by hand. Use a Y-piece if you only want to use cold water. 01 SETTING UP setting up your washing machine _17 WF0602NX-02847B_EN. indd 17 2010-04-29 ¿ÀÈÄ 6:09:29 setting up your washing machine Connecting the water supply hose (selected models) 1. in 02 WASHING A LOAD OF LAUNDRY This will remove any water that might be left over in the machine from the manufacturer's test run. Compartment Compartment Compartment : Detergent for prewash, or starch. : Detergent for the main wash, water softener, pre-soaking agent, bleach and stain removal product. fabric softener or former (fill no higher than lower edge (MAX) of "A") BASIC INSTRUCTIONS 1. Load your laundry into the washing machine. WARNING Do not overload the washing machine. To determine the load capacity for each type of laundry, refer to the chart on page 27 or 35. · Make sure that laundry is not caught in the door, as this may cause a water leak. · Washing detergent may remain in the front rubber part of the washer after a wash cycle. Remove any remaining detergent, as they may cause a water leak. · Do not wash water-proofed items. 2. Add detergent and additives to the dispenser drawer. Select the appropriate cycle and options for the load. [. . . ] Make sure the detergent is added to the center of the detergent drawer. Make sure your washing machine is on a level surface. If the surface is not level, adjust the washing machine feet to level the appliance. Make sure that the shipping bolts are removed. [. . . ]