User manual LG WD-14750SD

[. . . ] the appliance is designed for home use only. Make sure that water and electrical connections are made by qualified technicians, observing the manufacturer's instructions (see, "Installation Instructions, " page 4) and local safety regulations. All packing and transit brackets must be removed before the appliance is used. Serious damage may occur if they are not removed. [. . . ] If necessary, you can reposition the water supply hose at the washing machine end by loosening the fitting, rotating the hose, and retightening the fitting. Take the red L-shaped arm fitting for the hot water supply hose and connect to the red hot water supply intake on the back of the machine. Connect the other end of the hot water supply hose to your sink's hot water faucet and tighten it by hand. Use a Y-piece if you only want to use cold water. Notice: The appliance is to be connected to the water mains using new hose-sets and that old hose-sets should not be used. The end of the drain hose may be positioned in three ways: The drain hose must be placed at a height of between 60 and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide to the wall with a hook or to the faucet with a piece of string to prevent the drain hose from moving. The drain pipe branch must be above the sink siphon so that the end of the hose is at least 60 cm above the ground. Samsung recommends that you use a 65 cm high vertical pipe; it must be no shorter than 60 cm and no longer than 90 cm. When warm rinse is selected, only the final rinse will be warm. This will remove any water from the manufacturer's test run remaining in the machine. Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Logic" automatic control system. When you select a wash program, the machine will set the correct temperature, washing time, and washing speed. to wash clothes using the Fuzzy Logic programs: 1. Load the articles one at a time loosely into the drum, without overfilling. Add the detergent, softener, and wash detergent (if necessary) into the appropriate compartment. Turn the Fuzzy Control dial to select the appropriate program for the type of clothes Normal, Colours, Perm Press, Delicates, Wool, Hand wash, Quick, Rinse+Spin, Spin, Drain, Calm Wash, Mixed Load, Heavy Duty, Towels. You will see the indicators light up on the control panel. At this time, you can control the wash temperature, rinsing times, spin speed, delay time by pressing the appropriate option button. When the cycle is finished: After the total cycle has finished, the power will turn off automatically. Notice: The door will not open untill 3 minutes after the machine stops or the power turns off. [. . . ] Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. Do not overload the wall outlet or extension cords. This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance, please observe local waste disposal regulations. [. . . ]