User manual LG WE32Q101P

[. . . ] • For all the problems arising after installation by someone who has no relevant qualifications, our company will not provide free service. • The following safety cautions are provided to prevent unexpected dangers or losses. WARNING : If the user does not follow the mandatory items, it may result in serious injury or death. CAUTION : If the user does not follow the mandatory items, it may cause personal injury or property damage. : Warning and Caution are to call the user’s attention to the possible danger. [. . . ] Heating operation: - The heating mode doesn't work if desired temperature is lower than room temperature Please increase the desired temperature. 1 Please setup desired wind powerfulness by wind powerfulness button. • Every time you press wind powerfulness, you can select the wind flow in order of ‘feeble → weak → weak medium → medium → medium strong → strong → power → automatic’. • The menu item might not be partially selected according to product function. • Please refer to product manual for product’s detailed function. Wind direction : You can simply adjust desired wind direction. 1 Please set desired wind direction by pressing button. You can select wind direction of (comfortable wind → Up/Down and Right/Left → Right/Left → Up/Down) by pressing button. Partial item of wind directions might not be selected according to product function. Please refer to product manual for product’s detailed function. Room Temperature Check button, 1 Whenever pressbe displayedthe room temperature will within 5 seconds. After 5 seconds, it turns to display the desired temperature. Because of location of remote controller, the real room temperature and the this displayed value can be different • For air-cooling drive, from 18°C to 30°C, and for heating drive, from 16°C to 30°C, you can select desired temperature. • 5°C is proper for the difference between room and outside temperature. 32 New Wide Wired Remote Controller Owner’s & Installation Manual 33 Owner's instruction Owner's instruction ENGLISH Sub function - Direct Wind / Indirect Wind It is the function to directly or indirectly control wind direction by body perception sensor. The method to setup direct/indirect wind The method to cancel direct/indirect wind 1 2 Please press button. 1 Please press button. The icon of direct/indirect wind blinks on the display, and then, if pressing button, direct/indirect wind icon is fixed and the function is setup. wind 2 The icon of direct/indirect then, if blinks on the display, and pressing button, direct/indirect wind icon is removed and the function is cancelled. 3 If pressing setup mode. button, it gets out of direct wind ❈ After setup, it automatically gets out of setup mode if there is no button input for 25 seconds. ❈ When exiting without pressing set button, the manipulated value is not reflected. indirect wind 3 If pressing setup mode. button, it gets out of direct wind indirect wind • Direct/indirect wind function is additional function and it might not be indicated or operated at the partial product. ❈ To cancel robot cleaning manual setup function, you move to power saving menu by pressing button, and then if pressing button, "robot cleaning" icon disappears and the function is cancelled. 2 If moving to 'setup' icon area by using button, 'setup' icon blinks, and child lock function is setup if pressing button at that time. 3 When cancelling lock function, if moving to 'cancel' icon by pressing button and then, pressing button, child lock function is cancelled. 4 Press setup, it automatically gets out of ❈ After setup mode if there is no button input for 25 seconds. ❈ When exiting without pressing set button, the manipulated value is not reflected. 3 After setting, press to exit. button ❈ Robot cleaning manual setup function might not be operated at the partial product. ❈ When exiting without pressing set button, the manipulated value is not reflected. 40 New Wide Wired Remote Controller Owner’s & Installation Manual 41 Owner's instruction Owner's instruction ENGLISH Function setting - Robot Cleaning Automatic Setup Robot cleaning function is the function of cleaner attached to the product to automatically clean filter when using air-conditioner for the specific period of time. Set manual or automatic mode of smart cleaning. Function setting - Filter Sign Clear This function is to clear the indicator of indoor filter cleaning. 1 Pressthe until button repeatedly is flashing. 1 Press the button repeatedly until is flashing. is flashing, press 2 When the clear this display the to flashing, press 2 When the to set/clear this function. button Set state : Enable Auto Smart Clean function • When filter is covered by dust, it will reduce cooling/heating efficiency and accumulate more electric power. do clean the filter whenever cleaning time is expired. ❈ Filter cleaning indication is automatically cancelled without the separate cancellation after certain period of time. Clear state : Disable Auto Smart Clean function 3 When returning to manual robot cleaning, manual function is cancelled if moving to 'manual' icon by pressing Right/Left button and then, pressing button. 4 Press setup, it automatically gets ❈ After out of setup mode if there is no button input for 25 seconds. ❈ When exiting without pressing set button, the manipulated value is not reflected. • Robot cleaning function is an additional function of the product and might not be operated at the partial product. 42 New Wide Wired Remote Controller Owner’s & Installation Manual 43 Owner's instruction Owner's instruction ENGLISH Function setting - Elevation Grill This function is to move the indoor filter up/down for cleaning filter. [. . . ] ❈ If no button input for 1 minute after the setting, it exits the settings mode automatically. ❈ When exiting without pressing set button, the manipulated value is not reflected. Lock, Filter Cleaning, Time Setting, Converting Temperature ❈ Refer to 'Function Settings - Lock Settings' part for lock function. ❈ Refer to 'Function Settings - Filter Cleaning Display Release' part for Filter Cleaning function. ❈ Refer to 'Function Settings - Time Settings' part for Time Setting function. [. . . ]