User manual LG WF-660

[. . . ] The following symbols have been used in this user guide : Important information about concerning your safety and information on how to avoid damaging the appliance. These warnings are for the safety of you and others around you. Please read these points carefully before installing and using your appliance. Keep this user manual with your appliance. [. . . ] Before closing the lid of your appliance, ensure that the drum is properly closed : · When the two shutters are closed, · The symbols which correspond to the different stages of the cycle are displayed ( Prewash, Wash, Rinse, Drain, Spin). If you turn the programme selector to another programme while a cycle is in How to run a wash cycle 33 "Err" flashes and the "Start/Pause" pushbutton flashes red for a few seconds then the current cycle display reappears. At the end of the programme, if you have selected "Rinse hold" or "Night silence plus" , you then need to select a "Spin" or "Drain" programme to finish the cycle. "No spin" The water will be drained without spinning. "Night silence plus" The washing machine does not empty the water after the final rinse which prevents the washing from creasing. Because there are no spin cycles, the washing programme is very quiet and can be selected at night. in Cotton and Synthetics programmes , the rinsing cycle uses more water. "Rinse hold" The washing machine will not drain the water from the last rinse, so will not crease the laundry. Selecting options You must select the different options after selecting the programme and before pressing the "Start/Pause" pushbutton (see "Programme table"). press the desired button(s) ; the corresponding lights come on. If one of the options is not compatible with the selected programme, "Err" flashes on the display and the "Start/Pause" pushbutton flashes red. If the modification is not possible, "Err" flashes in the display and the "Start/Pause" pushbutton flashes red for a few seconds. If you still decide to change the programme, you must cancel the current programme (see below). Cancelling the programme If you want to cancel the programme, turn the programme selector to the "Stop" position. It is normal for the programme selector to remain stationary during the cycle. the symbol for the current cycle and the remaining time appear on the display. If a delayed start has been selected, the countdown appears on the display (hour by hour, then 90, and minute by minute from 60 min). 36 how to run a wash cycle End of the programme The washing machine stops automatically ; the "Start/Pause" pushbutton goes out and "0" flashes on the display. We recommend leaving the lid and drum open after use to ventilate the water tank. If the appliance is on but no commands are selected for 10 min before or after a cycle, it goes into standby mode. The screen light goes out and "Start/Pause" flashes slowly. To exit standby mode, simply press any pushbutton or turn the programme selector. [. . . ] Rinses : Hand washed items can be rinsed in this program. Wool : Machine washable wool carrying the labels "pure new wool, machine washable, does not shrink". , normally soiled work clothes, bed linen, table linen, body linen, towels. Programme / Washing type Temperatures °C Cottons Synthetics Delicates Easy iron Jeans Spin Drain Rinses Lingerie Silk Handwash Wool Sport Eco* cold - 90 cold - 60 cold - 40 cold - 60 cold - 60 cold - 40 cold - 30 cold - 40 cold - 40 cold - 40 40 - 90 Average consumption** Litres 58 44 46 55 55 44 50 40 50 50 50 58 kWh 2, 00 0, 85 0, 45 0, 50 0, 90 See display 0, 02 0, 002 0, 07 0, 50 0, 30 0, 45 0, 45 0, 65 1, 80 Time Read product label for recommended amounts and how often descaling should be carried out. [. . . ]